Dish Network Wireless Joey Schnellstart-Handbuch
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für DVR Dish Network Wireless Joey herunter. Dish Network Wireless Joey 2 Seiten. Setting up your replacement receiver
Auch für Dish Network Wireless Joey: Setup-Handbuch (16 seiten), Aktivierungs- und Einrichtungshandbuch (2 seiten)
Seite drucken
SETTING UP YOUR
REPLACEMENT RECEIVER
Be sure to read these instructions before
disconnecting any cables from your original receiver.
1.
Move Cables to Your Replacement Receiver
a. Stacking Method
Use this method if you are able to place your replacement receiver
next to your original receiver and you can access and see the back of
both receivers. One by one, disconnect each cable from your original
receiver and connect it to the same port on your replacement
receiver. Once you have connected all the cables, skip to
Original Receiver
Your wiring set up may be different.
DN005773
b. Diagram Method
If you can't use the stacking method, disconnect the cable(s) from
the back of your original receiver and use the following diagram to
reconnect the cable(s) to your replacement receiver. Try to only
disconnect cables from your original receiver, and not from the point
where the cables connect to the TV, or other components.
i.
Connect the
HDMI cable
from the TV to
your receiver.
Step
2.
Replacement Receiver
Connect the
Composite
RCA cables
from the TV to
your receiver.
ii.
Connect the
replacement
Power adapter.
iii.
Plug your
receiver into
a wall outlet.
OR