Dish Network DISH 1000 Handbuch

Blättern Sie online oder laden Sie pdf Handbuch für Antenna Dish Network DISH 1000 herunter. Dish Network DISH 1000 20 Seiten.
Auch für Dish Network DISH 1000: Installationsanleitung Handbuch (16 seiten), Handbuch (18 seiten)

Seite drucken

Introduction to Installation Diagrams

•

The installation options listed on the following pages may or may not be reimbursable installations. Refer to the latest

Business Rules to confirm reimbursement status.

•

Installations must use all Legacy LNBFs and switches, or all DISH Pro/DISH Pro Plus LNBFs and switches. Do not mix

and match Legacy components with DISH Pro/DISH Pro Plus components.

•

If upgrading from Legacy LNBFs and switches to DISH Pro/DISH Pro Plus LNBFs and switches, ensure all Legacy

components (for example, power inserters) are removed. Remove DP Adapters from any Legacy receivers connected

to DISH Pro Plus components.

•

Maximum distance between the furthest LNBF and farthest receiver is 200 feet for DP/DP Plus receivers; 100 feet for

Legacy receivers (four-digit model numbers). Maximum cable length from a wing dish with a compatible DISH Pro

LNBF to a DISH Pro Plus LNBF's LNB I

•

Ensure all components (for example, cable, ground blocks, diplexers, splitters, line amps, barrel connectors, wall plates

and surge protectors) are rated for DISH Pro/DISH Pro Plus installations (rated to 2150 MHz and pass DiSEqC 22 KHz

tone—review the DISH Network Approved Accessories List), also referred to as DP compatible.

•

Refer to the LNBFs and Switches and Dish Antennas sections for Legacy receiver installation considerations.

Abbreviations

•

DP: DISH Pro

•

DPP or DP Plus: DISH Pro Plus

Installation Diagrams - Introduction to Installation Diagrams

port is 80 feet with 120 feet from DPP LNBF to receiver for a total of 200 feet.

3 - 1