Aroma Quest AQ-L25 Gebrauchsanweisung - Seite 2

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Zubehör Aroma Quest AQ-L25 herunter. Aroma Quest AQ-L25 12 Seiten.

INSTALLATION INSTRUCTIONS:

Installation:

 Mount the wall support vertically. Then snap the device into the holder and make sure the cap and

power cord can be easily manipulated. Do not obstruct the scented air outlet in the microdiffuser

of this equipment.

 Install the device on the highest part of walls, ensuring that the bottle nozzle is at least 6" from the

ceiling. If possible, install it near air conditioning outlets or in ventilated places with traffic of people.

Avoid installing it near air exhausters.

 To install this device in air-conditioning ducts, connect a special air outlet hose (part sold

separately) from the outlet of the diffuser nozzle to the exit of the air conditioning duct.

 To remove dust, stains, or dirt from the device, use a cloth moistened with water on the outside.

Do not clean the nozzle or electronic part of the equipment.

Quick Activation:

1. Insert the key, without turning, into the bottom of the unit (being vertical) and press until the cover

is opened upwards. You can use the side slots to uncover more quickly. Keep the key in a safe

place.

2. Connect the power cable .

3. Set the device schedule and intensity before placing the bottle of fragrance. Read the Programming

Instructions Section for more information .

4. Remove the original cap from the fragrance bottle and screw the nozzle into it before installing.

Then insert the bottle vertically into the unit, pressing the nozzle against the diffuser until it clicks

into place.

5. Close the diffuser´s cover until it clicks. No need to lock.

Date-Time Settings:

1. When the display is lit, press SET to enter the schedule. While in this function, you will feel that the

equipment dispenses as an activation feature. For this reason, do not install the bottle until the

entire programming is complete.

2. The diffuser operates under the 24-hour time system. Use the UP and DOWN buttons to set the

time (hours and minutes) and day.

3. Press SET to save all the changes when done. The local time changing feature on this machine is

very sensitive since it always saves the last configuration received while being manipulated.

Memory Setting:

1. The equipment allows programming up to 4 memories that work simultaneously. Set each of them

so that they do not match in schedules or intensity of fragrances. Otherwise, the diffuser won´t

operate properly.