Diskashur iStorage Benutzerhandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Lagerung Diskashur iStorage herunter. Diskashur iStorage 19 Seiten.

Seite drucken

Adding a new User PIN

1.
Enter the Admin Mode (UNLOCK + 0 for five seconds. Enter Admin PIN and press UNLOCK).
2.
Press and hold UNLOCK + 1 until the LED turns to Solid
3.
Enter a User PIN and press UNLOCK (a minimum of 7 digits and a maximum of 16 digits).
The LED flashes
4.
Re-enter the new User PIN and press UNLOCK. If the LED stays solid
seconds and then solid BLUE, the User PIN was successfully added.

Deleting the User PINs

You can delete ALL User PINs by doing the following:
1.
Enter the Admin Mode (UNLOCK + 0 for five seconds. Enter Admin PIN and press UNLOCK).
Press and hold 7 + 8 + UNLOCK for five seconds until the LED flashes
2.
times and then changes to
Press and hold 7 + 8 + UNLOCK a second time for five seconds until the LED goes on
3.
solid
GREEN
PINs were deleted successfully.

Changing the User PIN

You can change the User PIN by doing the following:
Unlock the drive by inputting your User PIN and pressing the UNLOCK button.
1.
2.
Press and hold UNLOCK + 1 until the LED flashes RED.
3.
Enter your current PIN and press UNLOCK.
The LED will be Solid
4.
Enter the new PIN and press UNLOCK (The PIN must be a minimum of 7 digits and
a maximum of 16 digits). The LED will flash
BLUE
and Blinking GREEN.
5.
Re-enter the new User PIN and press UNLOCK. The LED stays solid
indicating that the User PIN has been changed successfully.
GREEN
three times, then returns to Solid
BLUE
for two seconds and then back to solid BLUE, this indicates that the User
BLUE
and Solid GREEN.
/
RED
alternating.
GREEN
BLUE
and Blinking GREEN.
BLUE
and Blinking GREEN.
three times, then returns to Solid
GREEN
GREEN
for two
GREEN
three
9