3D Systems Geomagic Touch Schnellstart-Handbuch - Seite 3

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für 3D-Drucker 3D Systems Geomagic Touch herunter. 3D Systems Geomagic Touch 5 Seiten. Haptic device

Seite drucken

If you see this

Proceed when one of the icons below appears:

Geomagic Touch connected without network connection

Geomagic Touch connected with network connection

Double-click the

Geomagic Touch Setup

Touch>Geomagic Touch

Device Model

•

Make sure the

•

Set Interface to

LAN port.

•

Set

Host Name

to match the Geomagic Touch serial number (located on the bottom of the device) to the corresponding device in this

list (this could take up to 3 minutes depending on your network connection).

Click the

Pairing

button in the Geomagic Touch Setup window.

3D Systems, Inc.

rotating icon, wait (this may take up to 3 minutes).

icon on your desktop or click

Setup.

is set to Touch.

Start>All Programs>3D Systems>Geomagic