3D Systems ProJet 1200 Handbuch zur Schnelleinrichtung - Seite 2

Blättern Sie online oder laden Sie pdf Handbuch zur Schnelleinrichtung für 3D-Drucker 3D Systems ProJet 1200 herunter. 3D Systems ProJet 1200 2 Seiten.

Seite drucken
Please refer to the ProJet1200 User Guide for safety and comprehensive operating instructions. You can find the ProJet 1200 User Guide on 3DSCentral.com.
SAVE ALL FOAM AND PACKING MATERIAL FOR FUTURE USE. SHIPPING WITHOUT THE ORIGINAL PACKING MATERIAL MAY CAUSE DAMAGE TO THE PRINTER.
Create Account
Installing Software
Type
http://3dscentral.3dsystems.com
in
1.
Go to
your browser. You will need to create an
com
account (your email will be used as the
password.
User ID) and choose an easy to remember
2.
Select Products.
password. Your printers serial number
3.
Select Professional 3D Printers from
appears on the back of the machine. After
the left navigation bar.
registration an email will be sent to you
4.
Select ProJet 1200 from the drop-
with a link to the 3D Systems 3DS Central
down menu.
login page.
A
B
4.
The next window that will pop up is the
3.
Double click the
Material,
(A), to load,
when material appears in the top block, it
Print Mode
is loaded. Click on
Next
(B).
desired
list of available modes. Click on
NOTE: If there already is material
loaded, you must first unload that
material before loading anything new.
Click on loaded material and select
Unload.
ProJet 1200™ Setup
5.
Download the
https://3dscentral.3dsystems.
by selecting the filename under the
software header.
and enter your user name and
6.
Double-click file that was just
downloaded to begin installing
software.
7.
Before leaving 3DS Central download
any documentation needed including
User
Manual.
the
A
B
B
5.
Test the connection under the
screen. Double click the
(A) by selecting
Print Mode,
(A), to load from the
NOTE: The curing chamber
Set
(B).
carousel should rotate if the
printer is connected and the display will
show
Testing
and information window
will say Testing.
NOTE: The door must be closed for
the UV chamber to work.
B
C
Connecting Printer
3DSPRINT
software
ONLY
1.
Connect
the A/C power cord
to utility power and then connect the
power supply to the power inlet (A) on
the printer. Ensure printer is fully booted
before proceeding.
2.
If connecting to a network, connect the
printer Ethernet port (B) to the network
with an Ethernet cable. If connecting via
USB connection see Step 3.
A
A
Activating Printer
Printer Tools
Test Post Cure
(B).
Before any parts may be printed, you must first
activate your printer.
Select
Post Cure
from the
1.
screen.
Fill out the information in the activation
2.
fields (A).
3.
Select
OK
(B).
Printer is now activated and is able to print parts.
C
A
3.
If connecting via USB without a
network, follow (previous) Step 1, when
ProJet 1200 Ready
LCD display shows
connect machine via USB cable (C). Once
printer is connected, display will show
Connected.
Error
Failed to check cartridge. Please make sure the cartridge is
properly inserted.
B
OK
Check Cartridge
The Check Cartridge command is used to check
the material level of cartridge as well as ensuring
the cartridge is properly inserted.
Printer Tools
Click
Check Cartridge
on the Help tab.
1.
2.
A dialog window will appear showing
remaining material.
NOTE: If the cartridge is not properly
inserted, an error will appear. Check
that the cartridge with the chip is properly
inserted and try again.
©2015 3D Systems, Inc. All rights reserved.
A
B
C
Adding Printer
1.
Open the 3DSPRINT application. Click on
Print Setup
the
module (A).
2.
Select the printer you want to add (B).
USB
Select
Next
(C).
NOTE: It may be necessary to
manually add the IP address in the
space provided (D) if the desired
printer is not on the list.
Printing a part
At this point, machine is ready to print a part.
Follow along in the User Guide to do so.
NOTE: Get more information about
the 3DSPRINT software by clicking
on the
Help Command or pressing
F1.
NOTE: Do not move the machine
with the cartridge inside once it is
opened.
pn 341411-00 Rev. F