displayit flare Montageanleitung - Seite 2
Blättern Sie online oder laden Sie pdf Montageanleitung für Inneneinrichtung displayit flare herunter. displayit flare 2 Seiten. Accessory kiosk with three shelves
Auch für displayit flare: Montageanleitung Handbuch (6 seiten)
Seite drucken1. During Flare frame assembly, insert
two t-bolts into each channel of the top
horizontal. Continue building the Flare
frame per the Flare instructions.
Threaded
Socket
ACCESSORY
KIOSK
SIDE
TOP
Inline
Splice
M8
Knobs
ACCESSORY
KIOSK
SIDE
BOTTOM
Adjustable
Foot
4. Assemble the two sides to the
kiosk as seen above. The top and
bottoms attach together using an
inline splice and two M8 knobs.
Shelf used
as spacer
6. Stand the kiosk up attach to the top
plate with two M8 knobs.
Note: The shelf (shown in green above)
makes a handy spacer between the
bottom of the kiosk and the Flare.
displayit.com
2. Place the kiosk top plate on top of
the flare with the four t-bolts passing
through the four holes
ACCESSORY
KIOSK
STANDARD
HORIZONTAL
ACCESSORY
KIOSK
STANDARD
HORIZONTAL
ACCESSORY
KIOSK
STANDARD
HORIZONTAL
Knobs Face
Backwards
5A. Attach the horizontals to the left side as seen
above. The horizontals attach using knob locks
(See Knob Lock Instruction Details to the right.)
Note: The infill panels may be used as spacers.
5B. Slide the infill panels completely into the frame
and attach the right side.
5C. Attach the right side vertical to the horizontals.
7. Adjust the bottom feet until the
Flare and kiosk are standing straight
(not leaning forwards or backwards).
800.207.0311
After-Hours Emergency: Call or Text 678.723.5343
Accessory Kiosk with Three Shelves
Assembly Instructions Page 2
3. Secure with four thumb nuts.
Knob Lock Instruction Details
8. Shelf brackets attach with thumb
knobs. Face the rubber pads upwards.
Set the shelf onto the brackets.
A. Insert lock into channel
B Tighten knob clockwise
Ensure the "lock" teeth are
fully enaged and the
connection can't wiggle.
Updated 11/15/2019