displayit flare Montageanleitung Handbuch - Seite 4
Blättern Sie online oder laden Sie pdf Montageanleitung Handbuch für Inneneinrichtung displayit flare herunter. displayit flare 6 Seiten. Accessory kiosk with three shelves
Auch für displayit flare: Montageanleitung (2 seiten)
Seite drucken7. Attach the power supplies to the frame via the velcro
strips and connect the wires to the curtain lights.
6. Run the main power cables through the wire
pass-through and connect to the power supply.
Plug the cables into an AC outlet to test the lights.
Counterbored holes
7. Attach feet using t-bolts and wing nuts.
Each t-bolt goes through a counterbored hole in the foot, then
through a hole in the metal frame. Secure with a washer wing nut.
Hand-tighten until snug; do not over-tighten.
displayit.com
7. To help stop wire shadows on the graphic, use
the provided snap-on wire management clips.
The curtain light clips may also be used for wire
management.
800.207.0311
After-Hours Emergency: Call or Text 678.723.5343
8' (92" x 92") Flare
Assembly Instructions Page 4
8. Carefully stand the display up.
Flare v2.0 Updated 11/22/2016