3D Systems ProJet 4500 Handbuch Nachbearbeitung - Seite 9
Blättern Sie online oder laden Sie pdf Handbuch Nachbearbeitung für 3D-Drucker 3D Systems ProJet 4500 herunter. 3D Systems ProJet 4500 13 Seiten. 3d professional printer
Auch für 3D Systems ProJet 4500: Kurzreferenz-Handbuch (19 seiten)
Seite drucken
3 .
Remove and immediately place on a clean surface (such as wax paper) to dry for 2-4 minutes . Orient that part so excess solvent will
drip off .
•
We recommend the use of wax paper .
•
The part will become sticky to the touch after 15 seconds . If possible avoid touching it until completely dry .
•
To speed the drying process blow dry with compressed air or use a fan .
•
For moving/interconnected parts, keep the connections moving while drying . This will prevent connections from fusing together .
4 .
Repeat the dipping process if desired .
3D Systems, Inc.
Clean surface for drying
Keep interconnected parts moving parts to prevent the part from binding.
9