DISPLAYLITE OLS-3250MD Benutzerhandbuch - Seite 11

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Monitor DISPLAYLITE OLS-3250MD herunter. DISPLAYLITE OLS-3250MD 18 Seiten. Mirror touch display

Seite drucken

9.3. Display Settings

Adjustment Item

Problem

Off

16 : 10

Aspect Ratio

5 : 4

4 : 3

You can set the gamma.

Gamma

Native / 2.2 / 1.8

You can change the picture quality from 0 to 100

(soft to sharp).

Press the ▲ button to change the picture quality in

Sharpness

numerical order. Press the ▼ button change the

picture quality in reverse numerical order.

H. Position

V. Position

Clock

Phase

To correct flickering text or lines

Auto Adjust

Adjust H. / V. position, clock and phase automatically.

*1. Only Analog input.

*2. For best results, use the Auto Adjust in conjunction with an adjustment image or the intended image.

Button to Press

Aspect ratio is turned off.

Displays all picture in 16 : 10 aspect ratio.

Displays all picture in 5 : 4 aspect ratio.

Displays all picture in 4 : 3 aspect ratio.

▲

▼

▲

Left

▼

Right

▲

Down

▼

▲

Narrow

▼

Wide

▲

▼

- 24 -

■

INSTALLATION LOCATION

∙

Do not install the monitor where sudden temperature changes may occur, or in humid,

dusty or smoky areas as it may cause fire, electric shock or damage. You should also

avoid areas where the sun shines directly on the monitor

CAUTION

■

DO NOT PLACETHE MONITOR IN A HAZARDOUS POSITION

∙

The monitor may topple and cause injury if not suitably located. Please also ensure

that you do not place any heavy objects on the monitor, and that all cables are routed

such that children may not pull the cables and possibly cause injury.

■

MAINTAIN GOOD VENTILATION

∙

Ventilation slots are provided to keep the monitor from overheating. Covering the slots

may cause fire. To allow adequate air circulation, place the monitor at least 10 cm (or 4

inches) from any walls.

∙

Do not remove the tilt stand when operating the monitor. Ventilation slots on the back

of the cabinet will be blocked and the monitor may overheat if the stand is removed.

This may cause fire or damage. Operating the monitor on its back, side, upside

down or on a carpet or any other soft material may also cause damage

■

DISCONNECT THE CABLES WHEN YOU MOVE THE MONITOR

∙

When you move the monitor, turn off the power switch, unplug the monitor and be

sure the signal cable is disconnected. If you do not disconnect them, it may cause fire

or electric shock

■

UNPLUG THE MONITOR

∙

If the monitor is not in use for a long period of time it is recommended that it is left

unplugged to avoid accidents

■

HOLDTHE MAINS PLUG WHEN REMOVING

∙

To disconnect the power cable or signal cable, always pull it by the plug. Never pull on

the cable itself as this may cause fire or electric shock

■

DO NOT TOUCH THE PLUG WITH WET HANDS

∙

Pulling or inserting the plug with wet hands may cause electric shock

■

WHEN YOU INSTALL THE MONITOR ON YOUR COMPUTER

∙

Be sure the computer is strong enough to hold the weight of the monitor,

otherwise, you may damage your computer.

■

RECOMMENDATIONS FOR 24/7 USAGE

∙

This product is not specifically designed for 24/7 usage in all environments.

- 9 -

Displaylite Reflect 32 / 46