Displays2go LTMLT2AV1 Installationshandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Installationshandbuch für Racks & Ständer Displays2go LTMLT2AV1 herunter. Displays2go LTMLT2AV1 4 Seiten.

Part

4-Fitting the bottom plate(13) on the desk[If you don't want to use

bottom support(11)]

first, take off screw M6X10 and M10X20 by wrench,then remove the whole

bottom support(11) to change bottom plate(13),tighten screwing 4pcs of

M6X10,then stick 4pcs mat feet(14) to the screws,see the fig.3. After that,

put the screw nut on the proper position of knob.The last step, make the

Hand handle(12) get through the desk and then make nut tighten by wrench.

D(4X4mm)

E(6X6mm)

Fig.1

Fig.3

-6-

Fig.2

Fig.4

Part 1-Install TV plate and fixed wreath

First install the plastic cover, then fixed the wreath(6) on the tube by

M5x10mm sunk bolt(7). Once the wreath fixed, then slide the TV plate into

the tube and fixed it by knob(4). When fixed wreath and TV plate are

installed, put on the tube cover(1) and use (C) by wrench(D) to make it

tighten.( picture 1)

Picture 1

NOTE:

D(3X3mm)

-3-