Displays2go HVAWM4290L Anweisungen
Blättern Sie online oder laden Sie pdf Anweisungen für TV-Halterung Displays2go HVAWM4290L herunter. Displays2go HVAWM4290L 5 Seiten.
Seite druckenPLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP FOR FUTURE REFERENCE! IF
YOU DO NOT UNDERSTAND THE INSTRUCTIONS, OR DO NOT FEEL THAT YOU CAN FOLLOW
THEM SAFELY, CONTACT A QUALIFIED CONTRACTOR. THE WARRANTY WILL BE HONOURED IF
ACCOMPANIED BY AN ORIGINAL SALES RECEIPT, AND ONLY IF THE INSTRUCTIONS HAVE
BEEN FOLLOWED EXACTLY.
・ The HVAWM4290L is designed to mount a panel onto a vertical wall. Hardware for mounting to
a wood stud is included. For mounting to any other surface, it is recommended you contact a
qualified contractor.
・ The wall or mounting surface must be capable of supporting the combined weight of the mount
and the display, otherwise the structure must be reinforced.
・ Safety gear and proper tools must be used. A minimum of two people are required for this installation.
Failure to use safety gear and/or attempting this installation alone can result in property damage,
serious injury, or death.
・ Follow all instructions and recommendations regarding adequate ventilation and suitable locations for
mounting your flat panel. Consult the owner ' s manual for your flat panel for more information.
・ This product will hold flat panels up to 90" and weighing up to 200 lbs.
・ VESA 800mm x 600mm
Tools Required
・ Stud finder ("edge to edge" stud finder is recommended)
・ Phillips screwdriver
・ Pencil
・ Hammer Drill (Concrete installation only)
・ 1/4" drill bit for wood studs, 3/8" drill bit for concrete
・ 7/16" socket wrench or bit driver for wood screws
・ Level
・ Tape measure
B
A
M5*15mm
M5*25mm
(x4)
(x4)
I
Metal Washer
φ8mm (x4)
1
HVAWM4290L
INSTRUCTIONS
Wall Plate (x1)
C
D
M6*25mm
M6*12mm
(x4)
(x8)
J
Spacers (x4)
Parts List
Adaptor Plate (x1)
E
F
M8*15mm
M8*15mm
(x4)
(x4)
K
Slider Plates
Allen Key (x1)
(x4)
Adaptor Brackets (x2)
G
M8*30mm
(x4)
M
L
Lag Bolt
8*70mm (x4)
H
Metal Washer
φ6mm (x8)
N
Anchor (x4)