Distech Controls Allure ECB-103 Installationshandbuch - Seite 4
Blättern Sie online oder laden Sie pdf Installationshandbuch für Controller Distech Controls Allure ECB-103 herunter. Distech Controls Allure ECB-103 16 Seiten.
Auch für Distech Controls Allure ECB-103: Installationshandbuch (16 seiten)
Seite drucken
Supported Quantity
The Allure EC-Smart Vue sensor connects to the controller's Subnet Port. Other expansion modules may also be connected to this port in a daisy-
chained fashion (see the controller's datasheet for compatibility information and supported quantities).
Each controller supports a maximum number of Allure EC-Smart Vue sensors. The Subnet ID of all Allure EC-Smart Vue sensors must be set to be
within the shown addressing range.
Series
ECB‑VAV
ECL‑VAV
ECY-VAV
ECY-VAV-PoE
ECY-303
ECB-VAV-O
ECL-VAV-O
ECB-VAVS
ECL-VAVS
ECB-VVTS
ECL-VVTS
ECB-VAV-N
ECL-VAV-N
ECB‑PTU Series
ECL‑PTU Series
ECB‑103
ECL‑103
ECB‑203
ECL‑203
ECY-TU/PTU
ECB‑300
ECL‑300
ECB‑400 Series
ECL‑400 Series
ECB‑600 Series
ECL‑600 Series
ECY-S1000 Series
Table 1: Number of Allure EC-Smart-Vue sensors supported by controller model
1.
A controller can support a maximum of two (2) Allure EC-Smart Vue sensor models equipped with a CO
CO
sensor.
2
2.
See the room device calculator spreadsheet available for download from our website to know the permitted quantities according to the controller model: VAV Smart Room Control Device
Calculator.xlsm.
About the Subnetwork Bus
The ECB-600 and ECL-600 controllers use the Subnetwork bus to support the ECx-400 Series I/O Extension Modules through the controllers Subnet+
and Subnet- terminals with 2-wire shielded cable.
The ECB-600 and ECL-600 controllers also use the Subnetwork bus to support one or more Allure Series(s) using standard structural (Cat 5e) cabling.
4 / 16
Maximum Number of Allure EC‑Smart‑Vue sensors
Up to 4
1
2
4
12
sensor. Any remaining connected Allure EC-Smart Vue sensor models must be without a
2
Permitted Subnet ID Addressing
Range
1 to 4
1 to 4
1 to 12