Acoustic Energy 3 Series Benutzerhandbuch - Seite 5
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Redner Acoustic Energy 3 Series herunter. Acoustic Energy 3 Series 8 Seiten. 3 series speakers
Seite drucken
Connections (301 and 305*)
Check that your ampli er is switched o before installing your
loudspeakers. Failure to do so may result in speaker or ampli er
damage.
The positive cable from the ampli er positive (or red) terminal should
connect with the positive (red) terminal on the loudspeaker. Similarly
the negative cable should connect the ampli er negative terminal
(black) to the negative terminal (black) on the loudspeaker.
After wiring up, lower the volume to the minimum, switch on the
ampli er, select the signal source and then raise the volume to the
listening level required.
(diagram for illustration purposes only)
Speaker
Speaker
(Rear)
(Rear)
Ampli er (Rear)
+
-
- +
- +
-
+
- +
*For 307 and 308 models please refer to ampli er instruction manual
as many con gurations are possible and will vary.