Acoustic Energy AE1 Classic Handbuch - Seite 7

Blättern Sie online oder laden Sie pdf Handbuch für Redner Acoustic Energy AE1 Classic herunter. Acoustic Energy AE1 Classic 12 Seiten. Reference series mkiii loudspeakers
Auch für Acoustic Energy AE1 Classic: Spezifikationen (2 seiten), Broschüre (2 seiten), Benutzerhandbuch (4 seiten), Benutzerhandbuch (7 seiten)

Seite drucken

c o n n E c t I o n A n d s E t u p

The AE1 Active is designed to take an output directly from a piece of source equipment. It is

possible to use a piece of equipment that has a fixed output and adjust the volume on the

speakers themselves but the most effective results will be gained by using a device with a

variable level output - commonly referred to as a preamplifier output. Recently, the number of

items of source equipment that have volume controls and preamplifier outputs has increased

considerably so there is a huge variety of possible sources for the AE1 Active. You can also use a

dedicated preamplifier if you prefer which will allow for multiple pieces of source equipment to

be used.

Each AE1 active speaker will need mains power and a signal from a device to function. The

connection can be made either using the RCA input or the XLR connection but you should not

try and use both connections at the same time. Make a single audio connection from the source

equipment or preamplifier to both AE1 Active speakers.

there is no means of looping the signal from one AE1 Active speaker to another and the

speakers must not be connected together in this way.

With power and signal connected, you should now be able to play audio. If you are using a

preamplifier output to connect the speakers, you can control the level of the system from the

volume control of the source equipment of preamplifier. If you are controlling the volume this

way, set the volume control on the rear of each AE1 Active to maximum. If you find that this

results in levels that can become uncomfortably loud too quickly, you can use these volume

controls to reduce the output of the AE1 Active to have a greater degree of fine control over

the volume.

We have designed the AE1 Active to give excellent performance when used in a variety of

locations and it will work well when placed on shelves or furniture. For best results however, we

would always recommend using a dedicated pair of speaker stands that help to isolate the

speaker and elevate it to the right height for listening- this height will vary slightly due to

different requirements but should leave the tweeter of the speaker at the height of your ear

when seated.

Isolating foam feet are supplied to protect the loudspeakers and surface they are placed upon,

from damage and vibration. We would recommend that the foam feet are not used when placing

the speakers on a dedicated stand.