Acoustic Energy AE1 Classics Benutzerhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Redner Acoustic Energy AE1 Classics herunter. Acoustic Energy AE1 Classics 4 Seiten. Reference series classic

Acoustic Energy AE1 Classics Benutzerhandbuch
6. Amplifiers
The AE1 Classic is a medium sensitivity speaker that demands a relatively
powerful amplifier if adequate monitoring volume levels are to be achieved in
an average studio room. A minimum of 75 and maximum of 200 Watts into
8 Ohms per channel is recommended. AE1 Classics offer a relatively easy load
to the amplifier and do not make unusually heavy demands on its current
delivery.
No overload protection systems are fitted to the AE1 Classic so it is possible
to cause damage through over-driving. Such damage can occur whatever the
power rating of the driving amplifier and is not covered by any warranty. If
ever the sound at high volumes becomes distorted your AE1 Classics are at
risk of damage. In such circumstances the volume must be reduced.
7. Listening
Before using your AE1 Classics for the first time make one final check of the
cables and connections. If all appears well begin listening at a relatively low
level to confirm that the system is operating as expected. Only increase the
volume if you are happy with the sound at low levels. If you are unhappy,
turn the system off and re-check all the cables and connections.
AE1 Classics may take a little time to reach normal operating temperatures
and to "run-in". It is unwise therefore to make too rapid a judgement about
the performance of the monitors. Your ears too will take some time to adjust
to the new sound so revisiting the speaker positioning is best left for a few
days.
8. Specification
Bass/Mid Driver: 90mm ceramic sandwich aluminium cone. 32mm edge-
wound voice-coil.
Tweeter: 25mm magnesium alloy dome.
Crossover: Symmetrical third order at 3kHz.
Power Handling: Compatible with amplifiers rated at up to 200 Watts into 8
Ohms
Frequency Response: 70Hz - 22kHz ±3dB
Sensitivity: 88dB for 2.83V at 1m
Nominal Impedance: 8 Ohms
Total Harmonic Distortion: Typically less than 0.3%, 200Hz to 20kHz
Power Compression: Less than 1dB for 16dB gain at 250Hz
Dimensions (H x W x D): 295 x 180 x 255mm
Weight (single speaker): 8kg
Tel: +44 (0)1285 654432 (Sales), +44 (0)1285 656890 (Technical). Fax: +44 (0)1285 654430
AE1 Classic Rev C
Acoustic Energy Limited, 16 Bridge Road, Cirencester, Gloucestershire GL7 1NJ.
Email: [email protected] Web: www.acoustic-energy.co.uk
Manual Part No. MA1001
2
9. Warranty
Your Acoustic Energy speakers are guaranteed
against original defects in materials, manufacture
and workmanship for 3 years from the date of
purchase.
Under this warranty Acoustic Energy agrees to
repair any defect or, at the company's discretion,
replace the faulty component(s) without charge
for parts or labour. This warranty does not imply
any acceptance by Acoustic Energy or its agents
for consequential loss or damage and specifically
excludes fair wear and tear, accident, misuse or
unauthorised modification.
This warranty is applicable in the United Kingdom
only and does not in any way limit the customer's
legal rights. Claims and enquiries under the
warranty for Acoustic Energy products purchased
outside the UK should be addressed to the local
importers or distributors. If you have reason to
claim under the warranty please contact your
dealer in the first instance.
Please retain all original packaging materials for
possible future use.
For any sales, technical or spares enquiries contact
your local dealer or distributor first.
13/12/05, 14:11