Acoustic Energy AEG05/P5 Benutzerhandbuch - Seite 12
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Redner Acoustic Energy AEG05/P5 herunter. Acoustic Energy AEG05/P5 16 Seiten. Powered 5.1 surround sound speaker system
Seite drucken
AEGOP5 Operation
- Test Mode
Test Mode
After connecting up to your source
and speakers, you can press the
TEST button on the remote to test the
system. You can also use the test
mode to test the location of the
speakers. When the TEST button is
pressed, white noise is generated
through all satellite speakers in an
order of Front Left, Centre, Front
Right, Rear Left, and Rear Right
channels for 2 seconds each. When
completed, the AEGO
5 returns to
P
Auto Decode mode.
When test mode is running, the display shows information in a
sequence as below:
DOLBY DIGITAL CO
TEST
L
DOLBY DIGITAL CO
TEST
C
DOLBY DIGITAL CO
TEST
R
DOLBY DIGITAL CO
TEST
SL
DOLBY DIGITAL CO
TEST
SR
AEGOp5 Operation
- Mute Mode
Mute Mode
Pressing MUTE Button on the remote
control will mute all signal outputs
(including the multipin and 6 RCA
connectors.)
To disable the mute function,
press MUTE Button again.
When MUTE Button is pressed,
the display shows the following information:
DOLBY DIGITAL CO
SURROUND
AEGOp5 Operation
input
power
mute
test
balance
delay
prologic
field
EQ on/off
EQ setup
preset 1
preset 2
preset 3
save1
preset 4
load
BassManager
Cen
SL/SR
SW
VOL
D Time
DRC
input
power
mute
test
balance
delay
prologic
field
EQ on/off
EQ setup
preset 1
preset 2
preset 3
save1
preset 4
load
BassManager
Cen
SL/SR
SW
VOL
D Time
DRC
MUTE
AEGOp5 Operation
- Master Volume Control
Volume Setting
To increase or decrease the master
volume of your AEGO
5, simply press
P
VOL + or VOL - on the remote control.
Example:
Volume being decreased
by 3 decibels.
DOLBY DIGITAL CO
VOLUME
-03DB
AEGOp5 Operation
- Balance Setting
Balance Button
You can set the volume setting of each
individual channel.
To select a channel, press BALANCE
button on the remote control
repeatedly until the desired channel is
reached.
Adjust volume on selected channel by
pressing VOL + or VOL - on the remote
control.
Example:
Press the BALANCE button once to display
the current balance volume for
channel L (Left).
DOLBY DIGITAL CO
BALANCE
L
Press the BALANCE button again to select
the next channel.
DOLBY DIGITAL CO
BALANCE
R
Press VOL + or VOL - will increase or
decrease the balance volume for selected channel.
DOLBY DIGITAL CO
BALANCE
R
11
preset 1
preset 2
preset 3
save1
preset 4
load
BassManager
Cen
SL/SR
SW
VOL
D Time
DRC
reset
input
power
mute
test
balance
delay
prologic
field
EQ on/off
EQ setup
preset 1
preset 2
preset 3
save1
preset 4
load
BassManager
Cen
SL/SR
SW
VOL
D Time
DRC
reset
0DB
0DB
+0DB