Acoustic Energy AEGO5 plus Benutzerhandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Lautsprechersystem Acoustic Energy AEGO5 plus herunter. Acoustic Energy AEGO5 plus 8 Seiten. Powered 5.1 surround sound speaker system

AEGOp5 Operation
AEGOp5 Operation

- Saving Presets

Setting Presets
The AEGO
5 enables you to customise
P
up to 4 settings. This function enables
input
power
you to save and load your favourite
mute
test
settings at any time.
balance
delay
prologic
field
EQ on/off
EQ setup
Saving a Preset:
Press the PRESET 1 button, the display
preset 1
preset 2
preset 3
will show the following:
save1
preset 4
load
DOLBY DIGITAL CO
BassManager
Cen
PRESET 1
SL/SR
SW
VOL
D Time
Press the SAVE button to save all the
DRC
current decoder settings into Preset 1.
DOLBY DIGITAL CO
PRESET 1 SAVING
DOLBY DIGITAL CO
PRESET 1 SAVED
When complete, your AEGO
5 will revert back to Auto Decode mode.
P
DOLBY DIGITAL CO
AEGOp5 Operation
- Loading Preset
Loading a Preset
You can load a previously saved preset
by pressing LOAD button on the
input
power
remote.
mute
test
balance
delay
prologic
Loading a Preset:
field
EQ on/off
EQ setup
Press any of the 4 preset buttons,
(PRESET 1, PRESET 2, PRESET 3 or
preset 1
preset 2
preset 3
PRESET 4), the display will show
save1
preset 4
load
the following:
BassManager
Cen
DOLBY DIGITAL CO
SL/SR
SW
PRESET 1
VOL
D Time
DRC
Press LOAD button to load the preset.
DOLBY DIGITAL CO
PRESET 1 LOADING
DOLBY DIGITAL CO
PRESET 1 LOADED
When preset loading is complete, your AEGO
5 will revert back to
P
Auto Decode mode.
DOLBY DIGITAL CO
AEGOp5 Operation

- Sound Field Processing

DSP Sound Field
Your AEGO
5 is equipped with a sound
P
field processor that gives you six
input
different field effects; Disable, Hall,
mute
Theater, Stadium, Club, and Church. By
balance
delay
pressing Field button on the remote,
field
EQ on/off
you can select any of these effects. You
preset 1
preset 2
can also increase or decrease the
Reverb value from 0 - 9 by pressing
save1
preset 4
VOL + or VOL - on the remote control
BassManager
whilst you are selecting the field effect.
SL/SR
VOL
Press the Field button and repeat to
change the current setting of Sound Field mode.
DOLBY DIGITAL CO
DIABLE
REVERB 0
DOLBY DIGITAL CO
HALL
REVERB 3
DOLBY DIGITAL CO
THEATRE REVERB 3
DOLBY DIGITAL CO
STADIUM REVERB 3
DOLBY DIGITAL CO
CLUB
REVERB 3
DOLBY DIGITAL CO
CHURCH
REVERB 3
AEGOp5 Operation

- Equalization

5-Band Equalization
Your AEGO
5 features a 5-band equalizer
P
which enables you to fine tune the sound
input
of your favourite movie or music. Press
mute
EQ SETUP button on the remote to
balance
delay
activate it. Repeatedly pressing EQ SETUP
field
EQ on/off
button will switch between the 5 bands.
preset 1
preset 2
Each band of the equalizer enables you to
save1
preset 4
adjust your desired volume to a maximum
BassManager
of ±10dB. Press VOL + or VOL - on the
SL/SR
remote control to adjust the volume.
VOL
DRC
After setting the desired volume for each
reset
EQ band, you
press EQ SETUP button again to store the
new setting for that band.
Press EQ ON/OFF button to switch the new EQ settings on or off.
14
Press the EQ SETUP button to display the current
setting of EQ Band 1.
DOLBY DIGITAL CO
EQ BAND 1
0DB
Press the EQ SETUP button again to select next EQ Band.
power
DOLBY DIGITAL CO
test
EQ BAND 2
0DB
prologic
EQ setup
Press the Vol+ or Vol- button to increase or decrease
preset 3
the volume for current EQ Band.
DOLBY DIGITAL CO
load
EQ BAND 2 +01DB
Cen
SW
Press EQ SETUP button to store the new EQ setting.
D Time
Press EQ ON/OFF button to switch the new EQ settings on or off.
AEGOp5 Operation - DRC
(Dynamic Range Compression)
DRC
Your AEGO
5 features Dynamic Range
P
Compression (DRC), its sophisticated
technology creates realistic sound fields
with richly detailed sound that is
remarkably free from distortion.
Repeatedly pressing DRC button will
switch between 3 modes:
"NO" No compression is applied to the
original audio signal, this provides the
greatest dynamic range.
"HALF" Partial compression is applied, this
function is useful if AEGO
5 is connected
P
to an external amplifier.
"FULL" Full compression is applied, this function is useful
if AEGO
5 is connected to an external amplifier.
P
power
Press the DRC button to display the current setting of Dynamic
test
Range Compression mode.
prologic
DOLBY DIGITAL CO
EQ setup
DYNAMIC
NO
preset 3
Press the DRC button again to switch between the DRC modes.
load
DOLBY DIGITAL CO
Cen
DYNAMIC
FULL
SW
D Time
DOLBY DIGITAL CO
DYNAMIC
HALF
AEGOp5 Operation
AEGOp5 Operation

- Resetting

Resetting
Your AEGO
5 can be reset to its factory
P
default settings by pressing RESET button
on the remote.
Press the RESET button to reset the
AEGO
5 to its factory default settings.
P
DOLBY DIGITAL CO
RESET TO FACTORY
When completed, your AEGO
to Auto Decode mode.
DOLBY DIGITAL CO
SURROUND
input
power
mute
test
balance
delay
prologic
field
EQ on/off
EQ setup
preset 1
preset 2
preset 3
save1
preset 4
load
BassManager
Cen
SL/SR
SW
VOL
D Time
DRC
reset
15
save1
preset 4
load
BassManager
Cen
SL/SR
SW
VOL
D Time
DRC
reset
5 reverts
P