CAMDUSTER V2203 Installationshandbuch - Seite 3
Blättern Sie online oder laden Sie pdf Installationshandbuch für Robotik CAMDUSTER V2203 herunter. CAMDUSTER V2203 4 Seiten. Bullet one security camera cleaning robot
Seite druckenIn case of DC power supply surveillance system, using the
DC splitter cable included in package:
-
introduce the DC male connector (of
power supply cable) into the female
connector of the DC power splitter cable
-
introduce one of the male DC connectors
(on DC power splitter cable) into the
security camera's female DC power source
connector
-
introduce the second male DC connector
(on DC power splitter cable) into the
female DC power plug of the CAMDUSTER
security camera cleaning robot
4. Setting up the CAMDUSTER security camera cleaning robot (OPTIONAL Step)
All CAMDUSTER devices come pre-programmed and are set on a default value: one cleaning
cycle per day. If this setting matches for your requirements, you can skip this step.
Between the cleaning cycles, the status led will flash according to the number of the current
program of the cleaning device. The default value is one flash, program 1.
Program list for CAMDUSTER security camera cleaning robot
Program 1. (1 led blink)
Program 2. (2 led blinks)
Program 3. (3 led blinks)
Program 4. (4 led blinks)
Program 5. (5 led blinks)
Program 6. (6 led blinks)
Program 7. (7 led blinks)
Program 8. (8 led blinks)
Program 9. (9 led blinks)
For changing the default values, please follow the next steps:
- after powering up the cleaning robot, wait for the first cycle, wait for the arm to come to the
waiting position
- press and hold (about 3 seconds) the programming button, the status led will remain On
Page 3 / 4
Security camera cleaning robot
Let the lens shine!
Once a day
Twice a day
3 times a day
4 times a day
5 times a day
6 times a day
Once a week
Demo mode – continuous cleaning / wait
between cleaning cycles 5 seconds
Sleep mode – the cleaning robot is put on
standby, no cleaning cycle will be started