3D&PRINT 3D Pen Pro Handbuch - Seite 4
Blättern Sie online oder laden Sie pdf Handbuch für Zubehör 3D&PRINT 3D Pen Pro herunter. 3D&PRINT 3D Pen Pro 20 Seiten.
Seite druckenINSTRUCTIONS
How to get started:
1. Insert the power supply into socket and plug power adapter into the pen's tail.
2. Press the extrusion button of the 3D pen to start. Your 3D pen starts to heat up.
The LCD screen will display the temperature and the lightindicator will flash.
For PLA you can choose a temperature between 60-190 °C and for ABS between
191-230 °C. To get the best result you have to preset the meltingtemperature
of the chosen filament. When the 3D pen reaches the preset temperature, the
power on lightindicator will stop flashing.
3. Insert the 1.75mm filament into the filament feeding pore which you can find
in the pen's tail. Hold the extrusion button and wait until the filament will be
inputted. The filament will be inserted when holding the extrusion button.
Press the button twice and the filament will be extruded automatically. When
you press the extrusion button again, the filament extrusion will stop. If you
want short bursts of extrusion of the filament you need to hold the button and
release the button when you want to stop. Don't let the printer head touch the
paper directly; keep it 0,5 cm apart. Tip: Use tracing paper on the stencil to stop
the filament from sticking.
4. You can now start with your 3D creation.
Adjustable speeding:
The 3D pen has 6 speed levels. Press
decrease the speed. The LCD screen will display the current level
Replacing filaments:
1. Before you place a filament, you have to cut the end of the
filament on both sides straight (see example).
2. Hold the reverse button and the filament will be reversed,
click twice and the filament will be reversed automatically.
When the filament is completely reversed, you have to cut the
filament straight(see example). Don't pull the filament during this
process. This could damage the drive gear of the 3D pen.
4
to increase the speed and press
to
.
Example: