CAME BK 2200 Handbuch für Installation, Betrieb und Wartung - Seite 5
Blättern Sie online oder laden Sie pdf Handbuch für Installation, Betrieb und Wartung für Garagentoröffner CAME BK 2200 herunter. CAME BK 2200 18 Seiten. Sliding gate operator
Seite drucken
CONTROL DEVICES
10 11 TS 1 2 3 3P 4 5 7 CX CY
A B S1 GND
Keypad selector.
WARNING! For the system to work properly, before fitting any snap-in card (e.g. the AF R800), you MUST CUT OFF THE MAIN POWER
SUPPLY and remove any batteries.
STOP button (NC contact). For stopping the gate while excluding automatic
closing. To resume movement either press the control button or any other
control device.
Activate the F1 programming function. If the button is no used, leave
this function deactivated.
OPEN ONLY function from control device with NO contact.
Warning: in MAINTAINED ACTION mode, the control device must be connected
to 2-3.
PARTIAL OPENING function from control device (NO contact)
ONLY CLOSE function from control device (NO contact).
Warning: in MAINTAINED ACTION mode, the control device must be connected
to 2-4.
OPEN-CLOSE-INVERT function (step-step) from control device (NO contact).
Alternatively, from the functions programming you can activate the single
command OPEN-STOP-CLOSE-STOP (sequential).
See function F7.
Antenna with RG58 cable for remote control.
BLACK
RED
Fit the R700 coding card to recognized
the transponder or the card reader.
Fitthe R800 decoding card so that the
keypad selector can be recognized.
Fit either theAF43S or AF868 card for
controlling the gate via a transmitter.
Transponder or card reader.