Aeris A300 Schnellstart-Handbuch - Seite 2
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Messgeräte Aeris A300 herunter. Aeris A300 2 Seiten.
Seite drucken
Dives begin automatically upon descent to 5 FT (1.5 M) for 5 seconds.
Upon ascent to 2 FT (0.6 M) for 1 second, operation shifts to Surface Mode.
Once 10 minutes elapse after surfacing from a dive, another descent is
considered a new dive.
Once 20 minutes elapse after surfacing from a dive, operation enters Power
Saver Mode (PSM) until any button is pressed to resume operation.
NORM (TECH) Dive Main
M
© 2002 Design, 2012
(Nitrox)
A
<< NOTE >>
• From Dive Main, press & release
A
- to step through Alternate
displays, then revert to Main.
• With Deep Stop ON, hold (2 sec)
- to view Preview screen.
• In Gas Switch Sequence, press
& release - to step forward
through selections.
S
• From Dive Main, hold (2 sec) - to
M
access Gas Switch Sequence.
• In Gas Switch Sequence, press
& release - to step back through
selections.
• In Gas Switch Sequence, hold (2
sec) - to revert to Dive Main.
• With Safety Stop Timer ON,
press & release - to Start/Stop
the Timer.
S
• From Dive Main, press &
release, or hold - for Backlight.
• In Gas Switch Sequence, press
& release - to select that Gas.
Doc. No. 12-7256-r01 (4/25/12)