CAME BPT 62100550 Benutzerhandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Intercom System CAME BPT 62100550 herunter. CAME BPT 62100550 16 Seiten. Video entry system internal receiver

Seite drucken
by accident, the buttons lock will be automatically
activated for 10 seconds. The buttons lock is
cancelled if there is an incoming call.
Standard functions
Answering a call
When there is a call, the image from the entry panel
is displayed.
To answer the call, press button
To mute the audio to the entry panel, press button
.
Press button
to open the door of the entry
panel displayed.
To end the call, press button
The call will be terminated automatically after 60
seconds.
Note: On some types of system the icon
will light up or a special icon will appear on the
screen to warn that the door is open.
Self-connection
To see the picture taken by the entry panel without
activating audio communication, press button
. Where there are several entry panels or video
cameras connected to the system, press button
again to show in succession the pictures taken by
these devices.
To start audio communication with the entry panel
displayed, press button
Note: in self-connection mode or when video
communication is active, press button
save a photogram of the image shown in the
voicemail.
Activating auxiliary commands
Buttons
and
can be associated with auxiliary
commands (switching on stair light, opening gate,
etc.).
The buttons are enabled when communication is
active, button can be active even when there is no
active communication if the system set-up allows it.
Disabling ringtone
To disable the ringtone, press button
LED comes on.
The ringtone will be disabled for all types of call;
therefore, receiving a call from the entry panel will
ONLY activate the video. To reactivate the ringtone,
.
.
.
; the relative
press button
Intercom calls
In systems with several receivers, select the number
of the receiver you want in order to make the
call. Press button
receivers from 5 to 8.
Select the receiver you want; the receiver calling
will give the line-free tone and the receiver being
called will ring.
To answer the call, press button
being called.
Transferring a call
With an active communication, select the receiver
you wish to transfer the call to (the receiver that is
calling will give the line-free tone, while the receiver
being called will ring).
To answer the call, press button
being called.
Once audio connection is made with the desired
receiver, press
The receiver receiving the call can transfer it again.
Porter functions
Notification of call from porter
The porter can send a notification asking to be
called back. The notification is marked by LED Aux2
coming on and staying on until the porter is called
back.
To call the porter, press button .
to
Request for call to porter
It is possible to send a notification to the porter
asking to be called back. To send the request to
the porter, press button , the porter will receive a
notification with the number of the caller.
Panic button function
Press button
will beep and the red LED will come on.
The porter receives a "Panic" signal, along with
the caller number, the LED stays on until the porter
makes contact with the receiver.
The panic signal takes priority over all calls.
Alarm signal
If an alarm device has been connected to the
relevant input on the receiver, when the alarm is
again.
(LED on) to be able to select
on the receiver
on the receiver
to transfer the call.
for at least 1 second, the receiver