Altman GALLERY SERIES Schnellstart-Handbuch - Seite 13

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Beleuchtungsanlagen Altman GALLERY SERIES herunter. Altman GALLERY SERIES 20 Seiten.

Gallery Series

Connecting Data (DMX Models)

Gallery Canopy or Pendent DMX controlled models offer a connection block (Figure 12) inside the luminaire's

canopy. For portable units (refer to "RJ45 / XLR Connectors").

Basic DMX512 installation consists of connecting multiple DMX controlled Gallery LED Luminaires together

(up to 32 Total devices per DMX string) in "daisy-chain" fashion. A cable runs from the DMX512 control

source to the DMX INPUT connection on the first luminaire.

From the DMX OUTPUT of the luminaire another cable runs to the DMX IN connection on the next luminaire or

other DMX512 device to be controlled.

At the end of each DMX Daisy chain, it is highly recommended that a DMX TERMINATOR (Altman

Lighting part number DMX-MPHX-TERM for the connectors shown in Table 2) is utilized on the

last luminaire (or device) in the chain.

All Canopy and Pendant units will come pre-wired from the factory with the Phoenix connector

installed and there is a spare set sent for Customer Wiring. On Pendant style fixtures (with a stem

mount) this connector must be removed prior to threading cable through the mounting stem and

then reinstalled. These connectors are multi-use and highly recommended for DMX wiring use.

Phoenix Connector Installation

For information on RJ45 connectors for DMX Input / Output, refer to Table 5 on page 13 for RJ45 and XLR

connector wiring.

Only those pins shown are used. Remaining pins on RJ45 and XLR connectors are not used.

Figure 12: Canopy / Pendant Connection Block

DMX Connections - RJ45 and XLR Connectors

DMX Signal

Common (Drain)

DMX -

DMX +

Table 5: RJ45 and XLR Connectors

(A) Insert and Hold small,

flat screwdriver into slot to

open wire way

(B) Insert CAT 5 DMX Cable into Wire

way. Strip wire to 0.25-in / 6.5 mm.

RJ45 Connector

Pin 7

Pin 2

Pin 1

Quick Start Guide

XLR Connector

Pin 1

Pin 2

Pin 3

Page 13