Altman SS-STRIP series Spezifikationen - Seite 2
Blättern Sie online oder laden Sie pdf Spezifikationen für Beleuchtungsanlagen Altman SS-STRIP series herunter. Altman SS-STRIP series 4 Seiten. 200/400/600 watt led 6’ spectra strip linear wash
Seite drucken6' Linear LED Wash Fixture
Specifications:
General:
200/400/600w Color Mixing and/or White LED
Fixture
Available in 6' lengths with power & data pass thru
ETL pending for indoor dry location use
Physical:
Rugged extruded and sheet aluminum construction
Corrosion-resistant materials and hardware
Dual access slots per compartment for spread
lenses & color media. Two access doors per slot
for tools free accessory access from either side of
luminaire
Available in Black, White or Silver TGIC polyester,
electrostatic application. Custom colors available
Approx. 48lbs. (21.78 kg)
Convection cooled without the use of fans.
Requires free air flow around fixture.
Electrical:
Multi-Voltage; 120-240 volt AC 50/60 Hz universal
power input
Neutrik® PowerCon™ input connector
3m power lead provided with bare ends. Factory
installed connector options available.
Requires power from a constant or switched
source
LED:
50,000 hour LED life
Up to (12) Light Engines per fixture utilizing Luxeon
Rebel LED's– 50 Watts Max per light Engine at full
RGBA or 3000° K White.
Color:
Color Mixing Light Engines utilize a 4-color mixing
system (Red, Green, Blue, and Amber)
White Light Engines utilize 3000° K high-color
rendering LEDs for crisp, clean light that blends
seamlessly with conventional sources.
White light engines can be used for basic
illumination as well as tinting the output of the color
mixing engines. White light engines can also be
used with conventional color media.
Optical:
Approximately 20° beam spread per light engine.
Spread lenses install on a per compartment basis
to change the beam spread of that compartment.
Lenses are available as an additional accessory
Control:
DMX-512A and RDM via 5-Pin XLR male & female
receptacles.
8 or 16bit resolution selectable per light engine per
fixture
Preset configurations for cell by cell control, whole
fixture control, 3-circuit strip light emulation, & 4-
circuit strip light emulation.
Virtual master channel available for all cells and
modes
Refer to operations manual for channels required
for each configuration.
57 Alexander Street, Yonkers, NY 10701 Tel: 914.476.7987, 212.569.7777; 800.4.ALTMAN Fax:914.963.7304
Visit our website at
www.altmanltg.com
Part Number: SS-STRIP-*-**-**
Model
Wattage*
SS-STRIP-*-**-***
600
400
200
Please refer to Configuration Options on the next page
for details of available wattage & light engine configurations.
Accessories Supplied with Spectra Strip
SS-ST-FT
Black Floor Trunions, pair
SC-36-BK
Safety Cable with Spring Clip
Color Frame (one frame per light engine
SS-ST-CF
installed)
Additional Accessories
508
Hanging Arm & Clamp, pair
6' Yoke for Spectra Strip with (2) 510-HD
SS-ST-YOKE
Pipe Clamps
SS-ST-LSL
Spectra Strip Linear Spread Lens
SS-ST-BL
Spectra Strip Frosted Blending Lens
XLR-5-5
5' 5 Pin DMX Extension Cable
XLR-5-10
10' 5-Pin XLR Extension Cable
XLR-5-25
25' 5-Pin XLR Extension Cable
99-DMX-TERM
In line 5-Pin XLR 120ohm terminator
61-0265
RAD Remote Fixture Addressing Device
© 2010 Altman Stage lighting Company, Inc.
Catalog Number
SS-STRIP-*-**-***
Light Engines**
Color***
RGBA
BK (Black)
RGBA+W
WH (White)
RGBA+W+W
SL (Silver)
W
RGBA
RGBA+W
RGBA
W