Aerix Vidius Handbuch
Blättern Sie online oder laden Sie pdf Handbuch für Drohnen Aerix Vidius herunter. Aerix Vidius 1 Seiten.
Seite drucken
WHAT'S IN THE BOX
By operating this device you acknowledge and accept all risks
VIDIUS Drone
and responsibilities of the use, storage and proper disposal of
any and all included lithium batteries.
You agree to follow the safety precautions outlined below in
AERIX
addition to any and all state, local or federal laws regarding lithium
batteries.
Axis Drones and its affiliates are not responsible for any misuse.
Please read and understand the following regarding the usage of Lithium batteries.
The Lithium battery included with your device is guaranteed to be free from any
manufacturing defects prior to initial use. Once the device has been used, owner
accepts any and all liability for the Lithium battery, maintenance and disposal.
Lithium Battery Warnings:
● Through the use of the included Lithium battery, you have assumed all risk
and responsibility regarding a Lithium battery and its use.
● ALWAYS unplug your battery from the charger immediately upon full charge.
● Do not attempt to charge your battery if it becomes swollen or hot.
● It's best to store your batteries charged and at room temperature. Storing
a fully discharged battery may cause irreversible damage to the battery.
● Never disassemble, puncture or modify the battery pack in any way.
● Never allow the battery temperature to exceed 150° F [65° C].
● If your battery begins to swell or "puff" during charge or discharge, or
becomes damaged in any way, stop using it and contact Aerix Drones
at 800-610-0605 to learn the proper way to dispose of your battery.
Charge Warnings:
● Only use the included charger with the included Lithium battery.
● Do not leave the charger unattended while in use, and always charge your
battery in a fire-resistant location.
AERIX
● Disconnect the battery and remove input power from the charger immediately
if either become hot.
● Do not allow water or other foreign objects to enter the charger. Keep the
charger away from moisture and do not submerge in water.
● Please keep all electronic components out of the reach of children.
www.aerixdrones.com
INSTALLING BATTERIES IN CONTROLLER
Blade A
Blade B
USB Charging Cable
Spare Blades
Camera Lens
Please load the batteries with the correct polarity, as shown below:
Power Switch
AERIX
Charger Port
Picture/Video Indicator
Blade B
Blade A
CHARGING DRONE
- Connect charging cable to the drone FIRST, then plug the USB side in.
Please be aware of your surroundings when operating your VIDIUS Drone.
- It is recommended to charge with a computer USB port, not a wall adapter.
As this device can reach high speeds, it is recommended to fly in open areas.
- The red light will be ON while charging and OFF when fully charged.
- Promptly remove the cable from both the USB and drone upon full charge.
- DO NOT FLY NEAR PEOPLE, ANIMALS OR PROPERTY
- DO NOT LEAVE drone unattended while charging.
- Adult supervision is recommended for users under 18
- Indoor flight should have plenty of open space
Turn Drone Upside Down to Align Prong
- Damage to property or injury to people is a risk, fly safely.
- Always keep the VIDIUS in your line of sight and under 400ft
- If device travels too far away from user it may lose control
GETTING STARTED
Fine tuning of forward and backward movement
- When flying outdoors please do not operate in med-high wind
- Always make sure your VIDIUS is fully charged before flight
Throttle - Rotation - Speed Selection
- Replace remote control batteries before they become too weak
- Avoid colliding with people, property or animals
Slow Blink: Not Transmitting
Releasing throttle
Please DO NOT fly
AERIX
Fast Blink: Attempting to pair
in areas with many
at high altitude may
Always keep device at
Solid: Paired and Operational
result in injury or
a safe distance from
obstacles or around
objects that can be
damage to device,
the ground and other
people or property.
objects.
easily damaged.
Right: OFF
Left: ON
1. Place the VIDIUS Drone on a flat LEVEL surface and turn drone power on
2. Align joysticks as shown in (Figure 1), Left stick down, right stick center
3. Turn the controller on by sliding the power switch to the left
Directional Movement - Trick Mode
4. Power Indicator light will begin flashing, indicating it is ready to pair
5. Move left joystick FULLY UP (Figure 2) then FULLY DOWN (Figure 3)
Fine tuning of left and right movement
6. Lights on both the VIDIUS and the Controller will remain solid
7. Your VIDIUS and Controller are now paired and ready for flight!
FRONT FLIP
The throttle on the VIDIUS will take some practice to achieve a good hover.
Drift Forward
Trim Backward
Press Right Stick IN, Controller will beep, Push Right Stick FULL UP
We recommend using your thumb and index finger to make small adjustments
to the throttle stick; you can progress to just your thumb with experience.
The VIDIUS will start out in LOW Speed, please start here to get acquainted.
Moving Left Stick Up/Down controls the Rise/Drop of the VIDIUS Drone
Drift Backward
Trim Forward
Drift Right
Trim Left
BACK FLIP
Press Right Stick IN, Controller will beep, Push Right Stick FULL DOWN
Drift Left
Trim Right
Moving Left Stick Left/Right controls the Yaw (Rotation) to adjust orientation
Left Rotation
Right Rotation
SPEED SETTINGS
AERIX
There are 3 unique speed settings programmed into the VIDIUS.
ROLL LEFT
To change speeds at any time simply press the Left Stick IN (Figure 1)
Pressing multiple times allows you to cycle through all of the speeds.
Press Right Stick IN, Controller will beep, Push Right Stick FULL LEFT
Each speed is indicated by a corresponding number of beeps.
Moving Right Stick Up/Down controls Forward and Reverse Flight Direction
Forward Flight
Low Speed:
This is the Default speed everytime you power up,
indicated by a single beep.
Medium Speed:
AERIX
Indicated by two beeps. Medium speed is twice as fast as low speed
and is able to be used both indoors and outdoors in light winds.
ROLL RIGHT
Reverse Flight
HIGH Speed:
Indicated by three beeps, this is the fastest speed for the VIDIUS Drone.
Moving Right Stick Left/Right controls Left and Right Flight Direction
Press Right Stick IN, Controller will beep, Push Right Stick FULL RIGHT
FLIPS AND ROLLS
Left Flight
Right Flight
The VIDIUS is pre-programmed with an algorithm to perform flips and rolls
AERIX
with ease, simply press the Right Joystick IN to enter "Trick Mode"
Once in "Trick Mode" - indicated by beeping, simply push the Right Stick
fully in the direction you want to flip or roll! (SEE NEXT PAGE)
Downloading & Using the VIDIUS Drone App
TROUBLESHOOTING
RECALIBRATION OF ACCELEROMETER
In the event you have issues with your VIDIUS please check here:
In order to view, record and control your VIDIUS Drone from your iOS
or Android device you will need to first download the VIDIUS Drone app.
Drone won't lift off of ground or flips over right away:
If your VIDIUS begins to be unstable during flight, drifts heavily in
1. Check the location of your A&B blades to match page 3.
one direction or troubleshooting doesn't work please do the following:
Please search for "VIDIUS Drone" in your app store or scan code below.
2. Remove blades, clean all debris from posts and motor base.
3. Make sure your drone and remote batteries are fully charged
1. Turn the drone and controller off, and remove batteries
4. Check that blades are not bent or damaged, replace as needed
from controller for at least 90 seconds.
Drone drifts heavily in one direction:
2. Leaving the drone and the controller off, replace
batteries in controller.
1. Make sure your Trimmer settings are at CENTER (long beep)
2. Make sure all blades are evenly and fully seated on driveshafts
3. Place drone on flat, level surface
3. Remove blades, clean all debris from posts and motor base.
iOS (iTunes)
VIDIUS Drone
Android (Google Play)
(level is the key word as this sets the gyroscope).
4. Remove Batteries from Controller for 90 seconds; replace.
4. Turn drone on.
5. Restart and Pair Drone and Controller (page 4)
Once downloaded, please turn your VIDIUS Drone on and go to your
6. If 1-4 did not solve please recalibrate your drone (page 10)
5. Turn controller on and pair with drone. (page 4)
device's wifi menu and connect to "VIDIUS Drone" to begin.
7. If 1-5 did not work please email [email protected] for help.
6. Push the Throttle (Left Stick) to Lower Left, HOLD
Once connected, open the VIDIUS Drone app and press GO FLY!
7. Push Control (Right Stick) to Lower Right, HOLD
Controller and Drone won't connect:
You can now view live video and operate the drone from your device,
1. Replace the batteries in the controller with BRAND NEW ones
if you would like to control with the analog controller please press ON
2. Charge the drone and try again (page 4) be sure to turn drone on first.
(7) at the top of the screen, which will then turn the phone controls OFF,
3. Try to pair VIDIUS via wifi to the Flight App, contact us with results.
then you may turn on the analog controller and pair to the drone.
Drone won't hover, keeps going up and down:
To record video, press the Video Icon (3), press again to stop recording.
1. Use thumb and index finger on throttle to make smaller adjustments
2. Check that blades are not damaged or on incorrectly
To snap a photo during flight, press the Camera Icon (2) one time.
8. Drone will flash for 1-2 seconds indicating success.
One or more lights/motors stopped working:
You can review your videos and photos by pressing the Review Icon (4).
1. Please contact [email protected] for futher assistance.
9. Take off and see which way the drone pulls, if any.
To change speeds while controlling with your device press 30% Icon (5).
10. Adjust trim buttons in 2-3 beep increments, in opposite
Can't View Live Video on Device:
direction of drone drifting, until it remains steady.
To control your drone with your device's gyroscope press Gyro Icon (6)
1. Be sure to turn drone on first, then connect via wifi on your device.
11. If steps did not correct the issue please contact us.
Flight controls on your device function the same as the analog controller.
CHANGING BLADES
Trim settings can also be adjusted from the app screen as well.
- To remove blades, firmly grasp the center of the blade and pull UP.
- To replace blades, firmly press the new blade DOWN onto shaft.
Please Note: Videos will be stored on your device when recorded.
- Adjust blades to be straight and even, no bends or twists.
- Location of A&B Blades should always be as shown on page 3.
Calibration