Alto HPA6 Benutzerhandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken Alto HPA6 herunter. Alto HPA6 13 Seiten. 6-channel headphone amplifier
Auch für Alto HPA6: Benutzerhandbuch (14 seiten), Benutzerhandbuch (14 seiten)

Seite drucken

1. The Rear Panel

4. Installation & onnection

4.1 Mains Connection

This is a dual voltage unit. Please ensure that the

set to the correct supply voltage before plugging the power cord into the wall outlet, use the same

fuse as marked on the fuse holder at the AC power connection socket.

Do not insert power cable into the unit until voltage has been correctly set. Do not plug the power cable

into AC power until voltage has been correctly set.

The mains connection of the

closed mains cable and a standard IEC receptacle. It meets all of the international safety certifica-

tion requirements.

4.2 Audio

onnection

The HPA6

6-Channel Headphone Amplifier

jack and it can be interfaced by several ways to support a variety of applications without any signal loss.

a. Wiring Configuration

Either the 1/4" TRS (Tip-Ring-Sleeve) phone jack or the XLR servo connector can be wired in balanced and

unbalanced modes, which will be determined by the actual application status, Please wire your systems

as the following examples:

b. In Line Connection

For these applications, the

TRS phone jack to easily interface with most professional audio devices. Follow the configuration

examples below for your particular connection.

LTO HPA6 6-Channel Headphone Amplifier is made by using the en-

For 1/4" TRS jack

1/4"TRS jack

Unbalanced input

For XLR connector

XLR Unbalanced input

HPA6 6-Channel Headphone Amplifier

LTO HPA6 6-Channel Headphone Amplifier is

presents with balanced XLR connectors and 1/4" TRS phone

1/4"TRS jack

Balanced input

XLR alanced input

provides

XLR connectors and 1/4"