Alto MAC 2.2, MAC 2.3, MAC 2.4 Benutzerhandbuch - Seite 8
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Verstärken Alto MAC 2.2, MAC 2.3, MAC 2.4 herunter. Alto MAC 2.2, MAC 2.3, MAC 2.4 17 Seiten. Professional stereo amplifiers
Auch für Alto MAC 2.2, MAC 2.3, MAC 2.4: Benutzerhandbuch (14 seiten)
Seite drucken
Rear Panel:
8 CIRCUIT BREAKER
This is an electronic fuse for protecting the unit from possible damage. When the
unit is overloaded or the temperature inside the unit is too high, this push-type
button will spring out and disconnect the power supply. Push the Breaker to
restore normal working conditions.
9 IEC socket for AC power cable
Connect the supplied main cord. Do not insert the power cord into the MAC 2
series amplifier and into the AC Outlet until voltage has been correctly set.
10 XLR BALANCED INPUT CONNECTORS
Each Channel features balanced XLR and 1/4" jack sockets wired in parallel. The
Balanced signals are less sensitive to hum noise generated by AC.
11 SPEAKON OUTPUTS (Channel 1 & Channel 2)
These connectors are specifically designed to connect high power speakers. The
correct polarity is secured automatically, they prevent shock hazard and they lock-in
securely.
12 BINDING POST OUTPUTS (Channel 1 & Channel 2)
Please make sure to respect the speaker polarity when using binding post.
Caution:
turn off the unit before connecting an audio signal to the binding post to
avoid any electric shock!
16
6
3. CONTROL ELEMENTS
14
CH-2
PUSH
A104
(+)
2
1
LINE
3
(GND)
- ( )
OFF
LF 30HZ
FILTER
BALANCED
1.15V/20K
INPUT
MODEL
PUSH
LINE
STEREO
PARALLEL
(MONO)
SERIAL
OFF
CLIP LIMT
CH-1
DESIGNED IN ITALY
BRIDGED INPUT
10
13
12
INPUT
CONNECTION
SRT
CH-1
CH-2
T(+)
R( ) -
S(GND)
ON
BRIDGED
MONO
CH1
1+
1
BRIDGED
BRIDGED
CHANNEL1
CHANNEL2
2+
2
CH2
1+
1
ON
15
11
8
BREAKER
9