3Dlabs X400 Schnellstart & Referenzhandbuch - Seite 4

Blättern Sie online oder laden Sie pdf Schnellstart & Referenzhandbuch für 3D-Drucker 3Dlabs X400 herunter. 3Dlabs X400 16 Seiten.

UNPACKING THE PRINTER CONTENTS

1. Remove the

RED

Failure to do so could damage the

gantry during shipping.

2. Plug in the printer using the supplied power cord. (Usually located on top of the print bed, zip tied

to the back panel).

3. Turn on the printer.

gantry guard blocks with a Philips head screwdriver before doing anything else.

printer. These are installed to prevent movement of the

Page | 4