Alto 30HA STANDARD I/MASTER I Gebrauchsanweisung - Seite 12
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Hochdruckreiniger Alto 30HA STANDARD I/MASTER I herunter. Alto 30HA STANDARD I/MASTER I 19 Seiten. Alto-shaam inc. pressure washer user manual
Auch für Alto 30HA STANDARD I/MASTER I: Benutzerhandbuch (19 seiten)
Seite drucken
3.6 End of operation
Turn the control knob (16) to position "cold water" against the blue field and activate the spray handle until
the temperature is below 50°C. The cooling period from 80°C to 50°C is approx. 2 min. by cold water
operation.
Then turn off the water supply and stop the machine by turning the control knob (16) to position - O -.
Now the high pressure hose can be detached.
3.7 Transport directions
Lifting manually:
When lifting the machine manually, lift in the lifting points
and on the side at the back of the machine.
Lifting by crane:
When lifting the machine by crane, lifting straps should be used.
Place the straps diagonally under the machine. Never lift the machine by the driving handle (17).
Transport on a vehicle:
Always transport the machine in upright position, apply the brake of the castor wheel (19) and
machine securely during transport.
10
Operating instructions
Danger of scalding!
Never dismount the high pressure hose
when the water temperature is above
50°C.
For lifting by crane, use lifting straps!
marked on the fender in front of the wheels
GB
fasten the