Alto CS 1020 PE Betriebsanleitung - Seite 16
Blättern Sie online oder laden Sie pdf Betriebsanleitung für Hochdruckreiniger Alto CS 1020 PE herunter. Alto CS 1020 PE 20 Seiten.
Seite drucken
Trouble/Problem
G
cleaning and care agents fail to
arrive
H
pump oil shows a greyish or
white shade
I
regulation safety block
constantly switches over (at
closed pistol)
* special equipment
30
Cause
d)
V-belt tension too weak
e)
suction and pressure valve of
hp pump defective or dirty
f)
pressure and quantity control
valve opened
g)
filter dirty
h)
motor speed too low
a)
empty cleaning and care
agents container*
b)
cleaning and care agents
container* silted up
c)
suction valve at cleaning and
care agents feed dirty resp.
defectifve
d)
air in the system
a)
worn collars
a)
trigger gun on/off untight
b)
high pressure screwing or
tubing untight
c)
high pressure hose leaky
Elimination
retighten V-belts
refer D d)
close valve
clean filter
refer operatin instructions Honda
re-fill it
clean it
disassemble it, clean rep. replace it
shut dosing valve, deaerate the pump,
refer F c)
renew collars
renew it
retighten screwing, seal tubing
replace it