Alto AltoDrive2.3 Benutzerhandbuch - Seite 5
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Crossover Alto AltoDrive2.3 herunter. Alto AltoDrive2.3 20 Seiten. Crossover digitale 2 way stereo digital x over
Auch für Alto AltoDrive2.3: Benutzerhandbuch (19 seiten)
Seite drucken
1.INTRODUCTION
Thank you very much for expressing your confidence in
LTO DRIVE2.3 you have acquired an extremely musical and flexible Active Crossover which will provide you also
the subwoofer application.
Our new
LTO DRIVE 2.3 (2 inputs, 4outputs, matrix-like operation X-over) allows the user to work with the quality of
the 2/3 by 24 32-bit DSPs, permits extremely precise and fast speakers control and equalization for PA systems with
the power of a matrix process allowing each kind of combination in assigning the 2 inputs to the 4 outputs. The
DRIVE 2.3 is based on 2/3 extremely powerful, high-speed 24 32-bit DSP and very high quality 20-bit A/D and 24-bit
D/A converters, preserving the pureness of analogue sound in your digital applications. The 128 64 graphical display
and the 12 buttons and the relative encoder available on the front panel, offer an easy way of editing data, so to create
new custom powerful and exciting presets which may then be stored in the unit as user's presets. The integrated MIDI
interface permits real-time editing with a powerful pc based SW or a MIDI standard sequencer.
Both input channels feature a digital, high quality filters 5-band parametric equalizer, allowing boost /attenuation of 15
dB in 0.5dB increment's steps. On each output channel is possible to have a 4 order low pass and a high pass filters,
limiter /compressor and polarity switchable 0 or 180 .
2.FEATURE LIST
Single Rack Unit
Robust and Compact Design
24 32-bit High Speed Signal Processor
Open Architecture for Easy Software Updates
Windows Editor for Easy to Use and Powerful pc Based MIDI Remote Control
Band Pass Filter Available (Until 24dB/Oct) for Each Output Channel
Up to 0.5 sec. of Delay Per Channel by Step from 21 ms to 2ms
Lock-System for the Editing Functions
Manufactured Under ISO9001 Certified Management System
3.FRONT AND BACK PANELS DESCRIPTION
3.1 The Front Panel
CLIP
-6
-12
-18
R
LTO
-24
-30
13
1.Power SW with LED
2.Mute buttons and LEDs for CH1, CH2, CH3, CH4
3.Utility key and LED
4.Edit key and LED
5.Dial knob(encoder)
6.Enter key
7.ESC key
8.Up key
9.Right key
10.Down key
11.Left key
12.Graphic display
13.Vu-meters
8
UP
LEFT
DOWN
12
11
10 9
LTO products by purchasing our
t h
6
5
ENTER
RIGHT
ESC
7
4
LTO DRIVE2.3. With the
3
2
MUTE CH3
UTILITY
MUTE CH1
MUTE CH4
EDIT
MUTE CH2
4
2
LTO
LTO DRIVE2.3
2-WAY STEREO
ON
DIGITAL X-OVER
OFF
POWER
1