3Doodler Create+ Benutzerhandbuch - Seite 13

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Zubehör 3Doodler Create+ herunter. 3Doodler Create+ 16 Seiten.
Auch für 3Doodler Create+: Benutzerhandbuch (11 seiten)

3Doodler Create+ Benutzerhandbuch
, after
mains
Once the Plastic stops reversing, it is safe to remove it from the
does not
Pen by gently pulling on the back of the strand.
we will
Take a break
• DO give your 3Doodler Create+ a rest after every 2 hours of
continuous Doodling. 30 minutes of down time should be plenty.
Treat your Nozzle right
• If you ever remove your
Nozzle, DO NOT remove it
when your 3Doodler Create+
is cold. Light should be BLUE
or GREEN.
perature
• If you ever need to tighten
your Nozzle, DO NOT force
fore you
the Nozzle or overtighten it,
d. If your
as you could break the Nozzle
rting and
and permanently damage your
3Doodler Create+.
Specifications are subject to change and improvement without notice.

SPECIFICATIONS

SPECIFICATION OF POWER ADAPTER
Output Power: 6W
Input: 100-240V AC, 0.5A MAX, 50-60Hz
Output Voltage: 5V
Output: +5V DC, 1.2A
Input Voltage: 5V
CARE & MAINTENANCE
CARE & MAINTENANCE
For care and maintenance information, and more advice on how to use your
For care and maintenance information, and more advice on how to use your
3Doodler Create+, please refer to our website: the3Doodler.com
3Doodler, please refer to our website: the3Doodler.com
To troubleshoot, please visit: the3Doodler.com/troubleshooting
To troubleshoot, please visit: the3Doodler.com/troubleshooting

LIMITED WARRANTY

LIMITED WARRANTY
For more details on your limited warranty, please visit:
the3Doodler.com/warranty
For more details on your limited warranty, pleae visit:
the3Doodler.com/warranty
For 3Doodler's Terms and Conditions and other notices please refer to our
For 3DoodlerÕs Terms and Conditions and other notices please refer to our
website: the3Doodler.com/terms-and-conditions
website: the3Doodler.com/terms-and-conditions
This device complies with Part 15 of the FCC Rules. Operation is subject
pped Ends
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user's authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the lim-
its for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to
ate+
radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
This marking indicates that this product should not be disposed of with
harmful interference to radio or television reception, which can be
other household wastes. To prevent possible harm to the environment or
determined by turning the equipment off and on, the user is encouraged
human health from uncontrolled waste disposal, recycle it responsibly to
promote the sustainable reuse of material resources.
to try to correct the interference by one or more of the following
measures:
This device complies with part 15 of the FCC Rules. Operation is subject to the
- Reorient or relocate the receiving antenna.
following two conditions: (1) This device may not cause harmful interference, and
- Increase the separation between the equipment and receiver.
(2) this device must accept any interference received, including interference that
- Connect the equipment into an outlet on a circuit different from that to
may cause undesired operation.
which the receiver is connected.
- Consult the dealer or an experienced radio/ TV technician for help.
eed
CAN ICES-3 (B)/NMB-3(B)
will start
Plastic is
3Doodler_Bob_User_Manual_MAIN_Inner_20180511.indd 12
3
This marking indicates that this product should not be disposed
of with other household wastes. To prevent possible harm to the
environment or human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable reuse of material
resources.
BLUE or
GREEN Light
12
11/5/2018 11:37 AM