Alto FLEX plus Benutzerhandbuch - Seite 7

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Aufnahmegeräte Alto FLEX plus herunter. Alto FLEX plus 14 Seiten. Sound enhancement processor

Seite drucken
11. SHIFT Switch
Through this switch to select the cutoff frequency for low pass filter (or high cut filter) between the
LOW and ULTRA-LOW.
12. LOW MIX Control
This control is used to adjust the amount of low frequency signal for sound enhancement. It covers a
range of 0 to 6.
13. MODE Switch
This switch provides two effect modes for bass processor: up for SOFT mode; down for NORMAL mode.
In the SOFT mode, the bass will go through gentle processing, you will hear the bass with very warm and
natural; otherwise, the bass will sound dry and coarse.

3.1.3 SURROUND PROCESSOR Section

14. SURROUND Switch
Engaging this switch will activate the surround processor function, which is used to make the cross
talk between the CHANNEL 1 and CHANNEL 2, hence, the function can be used only in linking with
stereo program material. If you don't want to add this effect to signal path, please let the switch free.
15. SURROUND Control
Rotate this control to adjust the intensity of cross talk effect between the two channels within a range
of 0 to 6. Clockwise for increasing the stereo effect, otherwise, for reducing the stereo effect.

3.2 The Rear Panel

16
AC INPUT
95-120V /210-240V 60-50Hz
Rated Power Consumption 16W
220-240V
FUSE:
210-240V: T315mAL 250VAC
95-120V: T500mAL 250VAC
REPLACE FUSE WITH CORRECT
TYPE ONLY
Apparaten skall anslutas till
jordat uttag nar den ansluts
A101
till ett natverk
17
16.FUSE Holder/Voltage Selector
This is a dual voltage unit. Before you attempt to connect and operate the unit, please make sure that your
local voltage matches the voltage on the fuse-holder cover.
Caution: The fuse protecting the AC supplies circuits of this unit. The fuse can only be changed by a
qualified technician, in the event of a fault or changing the supply voltage. If the fuse continues to blow
after replacing, discontinue use of this unit before repaired.
3
2
4
ON
1
5
OFF
0
6
SURROUND
SURROUND PROCESSOR
14 15
TIP/PIN 2
TIP/PIN 2
RING/PIN 3
RING/PIN 3
SLEEVE/PIN 1
SLEEVE/PIN 1
OUTPUT
INPUT
CHANNEL 2
19
18
6
TIP/PIN 2
TIP/PIN 2
RING/PIN 3
RING/PIN 3
SLEEVE/PIN 1
SLEEVE/PIN 1
OUTPUT
INPUT
CHANNEL 1