Camera Motion Research Connex Mini Kurzanleitung - Seite 7
Blättern Sie online oder laden Sie pdf Kurzanleitung für Transmitter Camera Motion Research Connex Mini herunter. Camera Motion Research Connex Mini 8 Seiten. For assembling cmr accessories with the connex mini transmitter, mini receiver, & fusion receiver
Seite druckenD. Removing the Transmitter Battery Clips if the Lithium Battery is not used
E. Using a D-tap Power Cable for the Transmitter
F. Lithium Battery Operation
The Connex Mini transmitters and receivers do not have power (on/off) switches, so they power up whenever
voltage is applied. The lithium batteries have a power button to turn them on and off. You must press and
hold the button for about 2 seconds to either turn on, or turn off the battery.
Note: The battery must be turned off when being charged. Watch for the walking lights to confirm charging
is taking place. Charging time is about 4 hours.
The battery clips can be removed by unscrewing the 4 screws.
Save the screws and clips so they can be re-installed later.
The D-tap power cable, PN:
DT15 must be purchased
separately. It includes a strain
relief which can be mounted to
the Mini transmitter cage as
shown left if the battery clips
have been removed.
Accessory Quick Guide
7