BALTENSWEILER FEZ T Betriebsanleitung - Seite 6

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Heimbeleuchtung BALTENSWEILER FEZ T herunter. BALTENSWEILER FEZ T 8 Seiten.

Protection classes, safety regulations and instructions

The luminaire may only be used with a mains voltage of 220-240 V 50/60 Hz. For mounting, observe the stat-

utory installation and safety regulations. Always disconnect the power supply when carrying out installation,

cleaning or maintenance tasks. Repairs may only be carried out by the manufacturer or by a qualified specialist

in accordance with the applicable standards. In the event of incorrect installation or that the luminaire has been

tampered with, all warranty claims shall be rendered invalid, as will the manufacturer's product liability obliga-

tion in accordance with the European Directive concerning Liability for Defective Products (85/374/EEC) and the

Swiss Federal Law on Product Liability (PrHG). BALTENSWEILER shall assume no liability for any loss or damage

to persons or property caused by improper handling or non-adherence to the safety regulations!

Do not touch the luminaire in the area of the optic and LED during operation – it gets very hot. The luminaire

must not be loaded and equipped with objects that are not part of the product (risk of breakage / falling), and

must not be covered with objects (e.g. textiles) during operation (fire hazard). Keep optic and LED free of dirt

and foreign particles (follow the care instructions). Such impurities can lead to increased heat generation which

can destroy the luminaire.

LEDs are permanently installed and may only be replaced by the manufacturer.

Do not shine the LEDs directly into eyes!

Electronic components are sensitive to electrostatic discharge and can be destroyed if the connections are

touched. Suitable protective measures against ESD (Electro Static Discharge) must be taken.

External dimmers (including wall-mounted dimmers) are NOT permitted and can damage the LEDs and the

control gear.

Care instructions: Disconnect the power supply. Wipe with a damp cloth. Do not use abrasive, alcoholic or

electrostatically charged cleaning utensils. Do not touch or clean the LEDs (mechanical / chemical / electrostatic

damage to the LEDs).

The luminaire may only be installed in dry interior spaces.

Correct disposal / Luminaire must not be disposed of wit the normal household waste.

Protection class II: Equipment with protection class II has reinforced or double insulation between the active

and accessible parts equal to the rated insulation voltage.

Protection class IP20:

IP20

Protection against contact with fingers and medium-sized solid foreign bodies ø ≥ 12 mm.

Technical conformity in accordance with EN directives.