CamFive FM Series Benutzerhandbuch - Seite 18

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Industrielle Ausrüstung CamFive FM Series herunter. CamFive FM Series 19 Seiten. Fiber laser marking machine
Auch für CamFive FM Series: Schnellstart-Handbuch (19 seiten)

Seite drucken

FM30 / FM50 User Manual

4. Laser beam path should be closed as far as possible in case the laser is leaked.

5. The fan must be checked if it is working correctly after being started up.

6. Use professional paper to wipe the lens clean. After wiping the lens, please wait for the

alcohol to be completely volatilized before installation.

7. It is strictly prohibited to place any irrelevant items with reflection or diffuse objects

around the equipment in case of laser reflection to the human body or flammable items.

8. During the working process, there must be a person waiting on duty, especially during

the process of high power cutting or carving organic ingredients higher material, in order

to avoid unexpected danger or fire. Do not operate without training or violates operation.

In this case, we will not take responsibility for any done damage.

9. As this kind of laser is invisible, pay attention to safety when working. Equipment is

strictly prohibited to be placed near inflammable or explosive items in case of laser

deviation of fires.

10. When the machine is working or debugging the light path, please be sure to pay

attention not to have any body part in the transfer area of the light path to avoid damage.

Wear protective glasses when adjusting the light path and adjust to the smaller current in

order to avoid laser deviation of fires.

11. The power supply voltage: Voltage fluctuations will lead to unstable equipment. High

voltage power supply can cause permanent damage to the device. To avoid the damage of

equipment and electric circuit caused by voltage fluctuation and ensure the stability of the

machine, we suggest users install a voltage stabilizer that is at least 5000 W. For users

whose voltage is quite unstable, be sure to install a regulator.

12. Please cut off the power supply immediately if the machine malfunctions or is on fire.

13. When the relative humidity of the environment is more than 80%, do not work with

the machine. Otherwise, it will affect the lifetime of the machinery or damage electronic

circuits.

14. When there is thunder and/or lightning, do not operate the machine.

The user must strictly abide by the above rules. Otherwise, the manufacturer shall not be

responsible for any injury or damage.