Divine Hot Tubs DL-1040 DLX Handbuch vor der Auslieferung - Seite 4

Blättern Sie online oder laden Sie pdf Handbuch vor der Auslieferung für Whirlpool Divine Hot Tubs DL-1040 DLX herunter. Divine Hot Tubs DL-1040 DLX 5 Seiten.

Seite drucken

Divine Hot Tubs DL-1040 DLX Handbuch vor der Auslieferung

Electrical requirements - 240V

To ensure you will have an opportunity to use your hot tub soon after delivery, it is very important that the re-

quired electrical service has been installed.

IMPORTANT: Electrical connections must be made by qualified, licensed personnel. Please contact a

licensed residential electrician for these services.

All models require a 50 amp single phase, 240 volt circuit breaker in the main electrical service panel. NOTE:

WE RECOMMEND THAT A SUB PANEL BE USED TO SUPPLY POWER AND PROTECT THE HOT TUB. All 240

volt Divine Hot Tubs™ Deluxe hot tubs must be wired in accordance with applicable local electrical codes,

and all electrical work must be done by a licensed electrician. A licensed electrician should install a four-

wire electrical service (two line voltages, one neutral, one ground) from the main electrical service panel to

the sub-panel, and from the sub-panel to

the hot tub per the appropriate wiring dia-

gram as illustrated below. The grounding

conductor must be at least #6 AWG. Your

electrician should mount the sub-panel in

the vicinity of the hot tub but it should not

be closer than five (5) feet from the hot tub

water edge (NEC 680-38 to 41-A-3).

NOTE: Complete step-by-step installation

and Wiring Instructions for all 240 volt Di-

vine Hot Tubs™ Deluxe hot tubs are includ-

ed in the Owner's Manual and with each

sub panel.

WARNING: Removing or bypassing the

GFCI breakers in the sub panel at any time

will result in an unsafe hot tub and will void

the warranty.

WIRE SPECIFICATION NOTE: Long electrical

runs may require a larger gauge feed wire

than stated. We recommend that a maxi-

mum voltage drop of 3% be used when cal-

culating the larger wire size.

Refer to the Wiring Diagrams to the right

for the electrical requirements of the 240

volt models.