esera 11169 V1 Benutzerhandbuch - Seite 3
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Zubehör esera 11169 V1 herunter. esera 11169 V1 9 Seiten. 1-wire outdoor - multisensor pro professional environmental monitoring via outdoor - multisensor
Auch für esera 11169 V1: Kurzanleitung (4 seiten)
Seite drucken
Art. No. 11169 V1
3
Auto-E-Connect Support
The EOS 100 supports Auto-E-Connect Level I, II and III.
4
Auto-E-Connect® System
With the launch of the ECO Controller, the ESERA Auto-E-Connect® 1-Wire Plug and Play system for the 1-
Wire bus is now introduced and supported.
This now enables fully automatic configurations of 1-Wire devices (sensors and actuators) on the 1-Wire bus.
It is optimized for commercial and industrial applications and enables significant added value beyond sensor
and chip data.
The Auto-E-Connect function is built up in three levels. Currently there are Level I, Level II and Level III
available.
Please refer to the "Technical data" to find out which Auto-E-Connect functionality this sensor supports.
With Auto-E-Connect Level III, fully automatic configurations of the 1-Wire devices on the
1-Wire Bus are possible. It is optimized for industrial and IoT applications and enables significant added
value beyond sensor and chip data.
With the Auto-E-Connect function, ESERA devices are detected fully automatically, suitable libraries are
started and ready-formatted data is output.
The Auto-E-Connect functionality will be available for the ECO Controller and ESERA-Station 200 Pro from
2021.
Auto-E-Connect Level I
OWD Detect: Detection of new sensors and actuators and automatic start of adapted libraries.
Auto-E-Connect Level II
Visualize product data: Readout and visualization of Auto-E-Connect and manufacturer data of sensors
and actuators, such as article number, date of manufacture, firmware and hardware version.
Auto-E-Connect Level III
Extended Plug and Play system for 1-Wire Bus
o
Pre Configuration: The OWD number for the next installation can be written to the 1-Wire device.
o
Automatic Positioning: The device logs on to any ECO Controller with Auto-E-Connect III with the new
request OWD number. This automatic login works up to the maximum possible OWD number of the
ECO controller
o
Sensorfinder Function: The ECO Controller can activate a status LED within the ESERA 1-Wire Pro
sensors. The status LED flashes or lights up permanently for a certain time. This makes the detection of
a device in a 1-Wire network much easier. A faster detection saves a lot of time and therefore money
when searching for a 1-Wire device.
o
Classes Assignment: ESERA 1-Wire devices are assigned to OWD classes with the same properties.
This assignment enables fully automatic visualization and data evaluation in control systems. A class list
is available from ESERA.
For further information about the ESERA Auto-E-Connect System please refer to the ESERA website and
the ESERA Config Tool 3.
Auto-E-Connect is registered as a German and European Patent by ESERA GmbH.
All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA GmbH. Errors and technical modification subject to change. ESERA GmbH 2021
www.esera.de
11169 V1.0 R1.1 Manual
Page 3 of 9