Divio NBF232P Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Sicherheitskamera Divio NBF232P herunter. Divio NBF232P 20 Seiten. Full hd extreme wdr box network camera

Seite drucken

1. System Requirements

Camera Cabling

Please follow the instructions below to complete IP camera installation.

2.1

Power Connection

Please refer to section Connectors. Alternatively, users can power up the

camera by PoE if a Power Sourcing Equipment (PSE) switch is available. Refer

to the section below for Ethernet cable connection.

2.2

Ethernet Cable Connection

To have best transmission quality, cable length shall not exceed 100 meters.

Connect one end of the Ethernet cable to the RJ-45 connector of the camera,

and the other end of the cable to the network switch or PC. The RJ-45 port

networks without routing to the outside plant.

Check the status of the link indicator and the activity indicator LEDs. If the LEDs

are unlit, please check the LAN connection.

http://www.diviotec.com

NOTE: If PoE is used, make sure PSE is in used in the network.

NOTE: In some cases Ethernet crossover cable might be needed when

connecting the camera directly to the PC.

Green Link Light indicates good network connection.

Orange Activity Light flashes for network activity indication.