3DUpFitters CR-10S Pro/CRX R1 Enclosure Kit Gebrauchsanweisung - Seite 11

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für 3D-Drucker 3DUpFitters CR-10S Pro/CRX R1 Enclosure Kit herunter. 3DUpFitters CR-10S Pro/CRX R1 Enclosure Kit 20 Seiten.

Seite drucken

Now attach the back to the assembled left and

front panels, which should look like the illustration

to the right.

Because this is a CR-10S Pro, you're not done yet.

Locate the three back vent ports that will draw air

through the electronics case.

These two pieces hook together to

create an airway for the 80mm fan to

draw air. Use the longer M4 cap head

screws to attach.