esera automation 11150 Benutzerhandbuch - Seite 2
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Zubehör esera automation 11150 herunter. esera automation 11150 7 Seiten. 1-wire multisensor pro for temperature and air humidity
Seite drucken
1
Product description
With the ESERA 1-Wire Multisensor Pro you have acquired a professional and highly accurate Multisensor.
Due to the new technology of the ESERA 1-Wire Pro sensors, the accuracy of humidity measurements is on
average 200 – 300 % higher compared to most standard sensors on the market.
Due to the use of highly integrated sensors with 12-bit resolution, the 1-Wire Multisensor delivers very
accurate values for temperature and relative humidity. In addition, the evaluation of the delivered measured
values is enormously simplified.
The 1-Wire Multisensor Pro enables easy climate monitoring of all rooms and buildings.
The 1-Wire Multisensor Pro is installed in a stylish wall-mounted housing and fits perfectly in modern living
and business areas.
Due to the wide ventilation openings, the 1-Wire Multisensor Pro detects climatic conditions in rooms and
buildings very exactly and quickly. For all types of radiator and heating control, an accurate temperature
sensor, as installed in this Multisensor, is an important component.
In combination with 1-Wire ESERA switching modules / binary outputs, a very effective and energy-saving
heating control (individual room control) is possible.
The 1-Wire Multisensor Pro is intended for use in normal living spaces. For outdoor use and in damp rooms, such
as saunas or steam baths, a matching sensor is available on the ESERA website.
Calibration of the sensors is not necessary. The 1-Wire Multisensor Pro can be put into operation immediately
without any waiting time.
The electrical connection to the 1-Wire bus system of the 1-Wire Multisensor Pro is carried out with screwless
push-in terminals and can be operated in standard mode, 3 cables for ground, data and 5V.
Each 1-Wire Multisensor Pro has an individual serial number.
Note
Basics and tips for the 1-Wire Bus system can be found in the ESERA Online Shop at
https://www.esera.de/1-wire-grundlagen/
or please refer to our eBook in the store under Training/Documentation
2
Auto-E-Connect® Support
With the launch of the ECO Controller, the ESERA Auto-E-Connect® 1-Wire Plug
and Play system for the 1-Wire Bus is now introduced and supported.
This now enables fully automatic configurations of 1-Wire devices (sensors and
actuators) on the 1-Wire Bus. It is optimized for commercial and industrial applications and enables
significant added value beyond sensor and chip data.
The Auto-E-Connect function is built up in three levels. Currently there are
Level I, Level II and Level III available.
Please refer to the technical data to find out which Auto-E-Connect functionality is supported by this sensor.
With Auto-E-Connect Level III, fully automatic configurations of the 1-Wire devices on the
1-Wire bus are possible. It is optimized for industrial and IoT applications and enables significant added value
beyond sensor and chip data.
With the Auto-E-Connect function, ESERA devices are detected fully automatically, suitable libraries are started
and ready-formatted data is output.
The Auto-E-Connect functionality will be available for the ECO Controller and ESERA-Station 200 Pro from 2021.
Auto-E-Connect Level I
OWD Detect: Detection of new sensors and actuators and automatic start of adapted libraries.
Auto-E-Connect Level II
Visualize product data: Readout and visualization of Auto-E-Connect and manufacturer data of sensors
and actuators, such as article number, date of manufacture, firmware and hardware version.
Auto-E-Connect Level III
Extended Plug and Play system for 1-Wire Bus
o
Pre Configuration: The OWD number for the next installation can be written to the 1-Wire device.
All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA GmbH. Errors and technical modification subject to change. ESERA GmbH 2021
www.esera.de
11150 V3.0 R1.0 Manual
Page 2 of 7