DivioTec NBR225P Benutzerhandbuch - Seite 8

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Sicherheitskamera DivioTec NBR225P herunter. DivioTec NBR225P 17 Seiten. Full hd multi-streams extreme wdr compact bullet ip camera
Auch für DivioTec NBR225P: Kurzanleitung (2 seiten)

Seite drucken

Camera Cabling

Before users connect cables, make sure that all cables and the power adaptor

are placed in dry and well-waterproofed environments, e.g. waterproof boxes.

The purpose is to prevent moisture accumulation inside the camera and

moisture penetration into cables, which might lead to camera breakdown.

Please follow the instructions below to complete camera connection.

2.1

Power Connection

For power connection, please refer to section

users can power the camera by PoE if a Power Sourcing Equipment (PSE)

switch is available. Refer to the section below for Ethernet cable connection.

2.2

Ethernet Cable Connection

For best transmission quality, cable length shall not exceed 100 meters.

Connect one end of the Ethernet cable to the RJ-45 connector of the camera,

and plug the other end of the cable to the network switch or PC.

Check the status of the link indicator and the activity indicator LEDs. If the LEDs

are unlit, please check the LAN connection.

NOTE: If PoE is used, make sure PSE is in use in the network.

NOTE: In some cases, Ethernet crossover cable might be needed when

connecting the IP camera directly to the PC.

Green Link Light indicates good network connection.

Orange Activity Light flashes for network activity indication.

Function

Cables. Alternatively,