esera automation 11319 Benutzerhandbuch - Seite 7
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Controller esera automation 11319 herunter. esera automation 11319 9 Seiten. 1-wire controller 1 ethernet w/auto-e-connect
Auch für esera automation 11319: Betriebsanleitung (4 seiten)
Seite drucken
Art No 11319
14
Firmware- Update
The latest device software (firmware) can
be found in the download area of
Config Tool 3. When commissioning the
1-Wire controller, please check for new
firmware versions. Please use the latest
version.
You update the firmware via
Config Tool 3.
Please refer to the operating instructions
for Config Tool 3, which can be found
within the Config Tool software under the
"HELP/SUPPORT" tab.
You will find a video about the firmware
update on our website under "Service
and Support, Support Videos".
14.1
Recovery function
Firmware- Update
If the update is faulty, for example due to a power failure during the update, you can
use the recovery function. To do this, hold down the reset button (this is located
under hole 11 on the top of the module), start the update in Config Tool 3 and release
the reset button after about 1 second after starting in Config Tool 3. Now the update
should start.
After performing an update, we recommend disconnecting the 1-Wire Controller / 1-
Wire Gateway from the power supply for about 30 seconds and restarting it.
If you have problems with the installation, we will be happy to help you. Simply
contact our support team by e-mail
15
Example for the integration into IP-Symcon
On our website, we provide ESERA IP-Symcon software modules for easy
integration of the 1-Wire Controller into IP-Symcon. This provides you with seamless
integration into the software.
Details can be found on the ESERA website under "Compatible controllers / central units / IP-Symcon
integration".
https://www.esera.de/kompatible-steuerungen-zentralen/ip-symcon-integration/
16
Example for the Integration in Loxone
Via the shop we provide an example project for the easy integration of the 1-Wire Controller into the Loxone
Miniserver. With this you extend the Miniserver with many 1-Wire functions.
Details can be found on the ESERA website under "Compatible Controllers / Central Units / Loxone Integration".
https://www.esera.de/kompatible-steuerungen-zentralen/loxone-integration/demo-1-wire-controller-1-loxone-
integration/
17
Example for the Integration in FHEM
For the integration into the open source automation software FHEM we provide a software module for the easy
integration of the 1-Wire controller. This provides you with a very powerful 1-Wire interface in FHEM.
Details can be found on the ESERA website under "Compatible controllers / central units / FHEM integration
https://www.esera.de/kompatible-steuerungen-zentralen/fhem-integration/
18
Example for the Integration in KNX Automation
For integration into a KNX automation system, we offer a software module for the Gira Homeserver together with
the Grot company. This provides you with a very powerful 1-Wire integration for your KNX system. Details can be
found on the ESERA website under "Compatible controllers / control centres / KNX Gira Homeserver
https://www.esera.de/cat/index/sCategory/339
All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA GmbH. Errors and technical modification subject to change. ESERA GmbH, ESERA-Automation 2020
www.esera.de
11319 V3.0 R1.0 Manual
Page 7 of 9