ClearCube A6108 Schnellstart-Handbuch - Seite 3
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Server ClearCube A6108 herunter. ClearCube A6108 15 Seiten.
Seite drucken
Power management
Power on and
power off
Reset power
Storage drives and carrier
About blade
storage drives
ClearCube Technology, Inc.
The power button is located on the top portion of the front panel, shown as 1 in
• Power on: After inserting a blade in a chassis or connecting power for configuration outside of a
chassis, press the power button to power on the blade.
Result: The blade powers on and the power indicator (1) is illuminated.
• Power off: Press and hold the power button for about 3 seconds to power off a blade.
Result: The blade powers off and the power indicator (1) turns off.
The reset button is located on the bottom portion of the front panel, shown as 2 in
When a blade is powered on, press the reset button to reset power.
Result: The blade powers down, the power indicator (1) turns off, and the blade powers on again.
A6108 blades use carrier free hot swappable bays for drives—such as hard disk drives (HDD), solid
state drives (SSD), self-encrypting drives (SED), and hybrid drives (SSHD).
NOTE: A6018 blades does support hot-swap replacement of drives. When hot swapping hard drives,
make certain that the OS drive is not removed..
Storage drives do not require power cables or data cables when inserting in bays. Power and data
connectors are housed inside the blade—insert and fully seat the carrier and fasten with screws.
The picture below shows the storage drive carrier.
1505 Volta Dr. Suite 100
Page
3
of
15
Cedar Park , TX 78641
Figure 1
on
page
Figure 1
on
page
P/N <TBD> Rev A, 1.0.10.9.2020
(512) 652-3500
www.clearcube.com
1.
1.