DivioTec NBR124 Handbuch zur Schnellinstallation - Seite 2
Blättern Sie online oder laden Sie pdf Handbuch zur Schnellinstallation für IP-Kamera DivioTec NBR124 herunter. DivioTec NBR124 2 Seiten.
Seite drucken3.5 Loose screws on the camera to remove cover and
glasses. Adjust direction of camera to watch a place
where you want to monitor.
Picture 4 Equipment installation diagram (2)
4. NETWORK OPERATION
4.1 Use correct power supply and need PC OS Windows 7.
4.2 After startup, connect the device with switch or router,
see below picture.
Picture 5 Network structure
4.3 Go to install CAM Finder and you can find your
camera.
4.4 Run CAM Finder, Click "Search", you will find
the device IP, make sure default IP address is
192.168.0.250 and see as below picture.
Picture 6 CAM Finder
4.5 Default IP setting:
IP address: 192.168.0.250
Subnet Mask: 255.255.255.0
Gateway: 192.168.1.1
User name: Admin
Password: 1234
4.6 Open IE Browser, type 192.168.0.250 (default IP
address) in the address bar, and then press the
Enter button.
4.7 You will be prompted with a pop-up window
asking for login information, type in "Admin"
(default login name) and "1234" (default
Picture 7 enter WEB GUI pop-up window
4.8 WEB GUI After login, enter into below user interface
"Live View", and also if you want more setting, you
can click the "Setup".
Picture 8 WEB GUI Live view
4.9 Network Basic Settings:
Displays the current IP address, Subnet Mask, Default Gateway,
DNS, HTTP Port and MAC of the camera, see below picture 9.
4.10 System Maintenance Settings:
If you need update your camera default, you can choose Restart
Camera or Factory Default or Hardware Factory Default, see
below picture 10.
5. SPECIFICATIONS
The Specifications are subject to change without prior notice.
Model
NBR124
Camera
Image sensor
1/2.8"2MP Sony STARVIS CMOS Progressive sensor
Minimum resolution
1920(H) x 1080(V)
Lens
Vari-focal Lens 2.8-12 mm F1.4
IR Effective distance
25M (Smart IR)
Day and night
Auto ICR
WDR
Yes (DWDR)
Color 0.05 Lux/F2.0
Minimum Illumination
B/W 0 Lux/F2.0
Electronic shutter speed Auto / Manual 1/3.75~1/10000
Gain control
Auto / Manual
Backlight compensation Yes
White balance mode
Auto / Manual
Privacy Masking
1 area
Image setting
Brightness, Contrast, Saturation, Sharpness, Mirror, Flip
Video
Video compression
H.264 / M-JPEG
Video streaming
Triple Streaming
H.264 Stream 1/ H.264 Stream2/ MJPEG Stream 3
Video resolution
1080P(1920X1080), SXVGA(1280X960),
720P(1280X720), XGA(1024X768), SVGA(800X600),
D1(720X480), VGA(640X480), 2CIF(704X240) ,
CIF(352X240)
Frame rate
1920X1080 @30fps,
1280X960 @30fps,
1280X720
@30fps
1024X768 @30fps,
800X600
@30fps,
720X480
@30fps
640X480
@30fps,
702X240
@30fps,
352X240
@30fps
Bit rate
H.264:500K~8Mbps
Network
Interface
10/100 Mbps Ethernet, RJ-45
Supported protocols
IPv4, IPv6, HTTP, HTTPS, SSL, TCP/IP, UDP, UPnP,
RTSP, RTP,SMTP, NTP,DHCP, FTP, Zero Configure
ONVIF
Profile S,Q
Users
Live viewing/Administrator for up to 10 clients
Browsers
IE
Event Management
Event trigger
Motion detection 5x5 areas / Tampering detection
Notifications
Send message via email or FTP, record JPG /AVI
General
Weight
900g
Dimension
96.58mm x 91.78mm x 300.11mm
Operating temp.
-20
o
o
C ~ 50
C
Humidity
10% ~ 90%RH (no condensation)
Certification
CE/FCC class A
Weather proof
IP66
Application
SDK available for application development