esera automation 11336 Benutzerhandbuch - Seite 6
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Gateway esera automation 11336 herunter. esera automation 11336 9 Seiten. W/auto-e-connect
Seite drucken
12
Software
Data interface Modbus TCP and ESERA ASCI Text protocol
To configure the Ethernet interface please use ESERA Config-Tool 3. This software is available for download on
our webpage.
12.1
Configuration and communication with 1-Wire Gateway 11
1-Wire Gateway 11 offers various
configuration and formatting options.
All options can be read out and
controlled by the ESERA Config-Tool
3. 1-Wire Gateway 11 and Config-
Tool 3 communication is based on
an open ESERA ASCII text protocol.
Therefore configuration and data
transfer with any terminal program
(such as Hercules or Putty) by
UDP/TCPIP and 1-Wire Gateway 11
is possible at any time. For detailed
communication commands please
refer to the
"Programming
which is available for download in
our webshop.
13
Firmware-update
A firmware update can be performed
with the Config Tool 3 software under
the "DEBUG/DATA" tab.
The button "DOWNLOAD
FIRMWARE" opens a window to
download new software (firmware) for
the 1-Wire Controller / 1-Wire
Gateway.
The firmware can be used for all
device versions of the 1-Wire
Controller and 1-Wire Gateway. The
corresponding functionality is
released on the installed device
adapted.
As of firmware version V1.18_38, it is
no longer necessary to press the
reset button of the 1-Wire Controller /
1-Wire Gateway to update.
Recovery function Firmware-update
If the update is faulty, e.g. due to a power failure during the update, you can use the
recovery function. To do this, hold down the reset button (located under hole 11 on the
top of the module), start the update in Config Tool 3 and release the reset button in
Config Tool 3 after approx. 1 second after starting. Now the update should start. After
an update we recommend to disconnect the 1-Wire Controller / 1-Wire Gateway from
the power supply for approx. 30 seconds and to restart it. If you have any problems
with the installation, we will be happy to help you. Simply contact our support by e-
mail ([email protected]).
All rights reserved. Reproduction as well as electronic duplication of this user guide, complete or in part, requires the written consent of
ESERA GmbH. Errors and technical modification subject to change. ESERA GmbH, ESERA-Automation 2020
www.esera.de
Manual"
11336 V2.0 R1.0 Manual
Page 6 of 9