ClearCube Cloud Desktop CD7500 series Schnellstart-Handbuch - Seite 6

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Desktop ClearCube Cloud Desktop CD7500 series herunter. ClearCube Cloud Desktop CD7500 series 8 Seiten.

Seite drucken

Setting up zero

clients

(continued)

Single and

high-resolution

monitors

ClearCube Technology, Inc.

Cloud Desktop CD9500/7500

Step

Connect the power adapter to the rear of the client, and

then plug the power cable into a power outlet.

See

"Button and

powering the zero client on and off.

Next step: You can now click Connect and select the host card to

connect to from the list displayed on the on-screen display (OSD).

If you are connecting a single monitor or a 2560 × 1600 monitor to a

zero client, perform the appropriate step shown below.

NOTE:

To support a single-monitor or 2560 × 1600 monitors,

install Teradici PCoIP Host Software (available from

ClearCube Support) on each host device.

Connecting a single monitor

Enable the Host Driver function on the peer host card and install

Teradici Host Driver software. See Tech Bulletin TB00274:

Configuring Dual-Monitor Systems for Single-Monitor Use on

ClearCube Support for more information.

Connecting 2560 × 1600 monitors

1. Enable the Host Driver function on the peer host card.

2. Install Teradici Host Driver software.

3. Connect cables as shown below. Note indicators 1 and 2 on the Y-

cable and connect them to the corresponding connectors on the

zero client.

www.clearcube.com

Action

indicators" for information about

Continued on next page

(866) 652-3500

6 of 8