ClearCube clientcube 2 Schnellstart-Handbuch - Seite 7

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Schalter ClearCube clientcube 2 herunter. ClearCube clientcube 2 15 Seiten. Secure kvm or secure km switch

Seite drucken

Setting up ClientCube 2 with KVM Switch,

Configure

devices and

connect

Additional

steps

ClearCube Technology, Inc.

The table below shows how to configure zero clients and remote hosts, and how to connect.

Step

Configure zero clients using the zero client on-screen display (OSD).

NOTE

For more information about the OSD and configuration, see the

appropriate zero client Quick Start Guide (included) and PC-over-IP

System User's Guide (download from ClearCube Support).

If you are using physical devices with PCoIP host cards, use a Web browser to

configure the host card as appropriate for your environment. For more information,

see the documentation cited above.

From the zero client OSD, click Connect.

Result: If you are using direct connection or reserved DHCP addresses, you are

connected to the remote host specified during configuration. If you are using DHCP

and device discovery, a list of available hosts is displayed. Select a host to connect to.

Optionally, install ClientCube 2 accessories including color chips to distinguish each port button,

and name labels to identify each network. See the included Secure DVI-I KVM User Manual for

more information.

3700 W Parmer Lane

Action

Page 7 of 14

Austin, TX 78727

Continued

P/N G0200161 Rev F, 1.5.01.19.2015

(512) 652-3500