ACOUSTIC SOLUTIONS 150 Benutzerhandbuch - Seite 6
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Redner ACOUSTIC SOLUTIONS 150 herunter. ACOUSTIC SOLUTIONS 150 6 Seiten. Amplifiers
Seite drucken
19
18
24
23
16
10
11
10-
Line input with RCA connectors, with input impedance of 22Ω for the
connection of high output signal types, such as iPods - computers -
keyboards.
11-
output with RCA connectors for connections to external devices such as
recorders - computers - iPods, etc..
12- STEREO IN:
Volume control for each channel (10) to be sent to the
MASTER volume (26).
13 - 14-
Tone control input (10), treble (13), bass (14) with a variation of + -
15db. Placing the controls in the middle do not give magnification or
attenuation of the corresponding frequencies.
15- STEREO OUT:
control output volume (11). This control is independent
from the MASTER volume (26)
16-
amplified output headphone jack stereo connector, pre master
independent of the MASTER volume (26). (The headphone amplifier is
class A).
17- PHONES:
volume control for headphone output (16). This control is
independent from the MASTER volume (26).
18- DIRECT OUT:
electronically balanced output with XLR connector, POST
EQ for connection to other sound systems.
19- LINE OUT:
unbalanced output with JACK POST EQ connector for
external amplification systems where the cable to connect them are not
long.
Acoustic Solutions 150
22
25 27
20
21
17
12
13
14
15
26
20- VOL. LINE OUT:
MASTER volume (26).
21- EFF. RET.:
MASTER (26).
22- EFF. (LED AND SWITCH):
the led 1-8 so that you can hear all the effects and stop at the most suitable
for that type of instrument.
23- OFF-ON RESONANCE:
the resonant circuit starts working. This circuit is used to make sure that
when you plug in an acoustic guitar at a high volume the guitar does not go
into resonance.
24- RESONANCE:
turning moves the NOTCH FILTER from a frequency of 100 Hz to a
frequency of 250Hz. The attenuation of NOTCH FILTER is 12db.
25- PH (LED AND SWITCH):
PH for powering condenser microphones. When the PH is active, the LED
is on.
26- MASTER:
instrument is connected does not come out.
27- PW:
6
7
level control of LINE OUT (19) independent from the
Volume that controls the amount of the DSP to send to
the SWITCH allows you to slide the flashes of
When pressing the button the led turns on, and
potentiometer which (once the button is pushed), by
The switch allows you to enable or disable the
general volume of the amplifier. When this knob is set to 0, any
power indicator.
Acoustic Solutions 150